544371

Bosch GSK 64 Manual

20
Zoom out
Zoom in
Previous page
1/218
Next page
1 609 929 X30 | (22.3.11) Bosch Power Tools
20 | English
Maintenance Schedule
Always keep air outlet 4, discharge lock-off 2 and trigger 5 clean and free
of foreign material (dust, chips, sand, etc).
Clean the magazine 10. Remove any plastic or wood chips that may accu-
mulate in the magazine during operation.
Clean the pneumatic tool in regular intervals using compressed air.
Correction of Malfunctions
Measure Explanation Action
Draining the exhaust filter daily.
Prevents the accumulation of dirt/ debris and
moisture in the pneumatic tool.
– Open the drain valve.
Keeping the lubricator filled at all times.
Ensures the lubrication of the pneumatic tool. – Fill lubricator with the recommended lubri-
cants.
(See “Lubricating the Pneumatic Tool”,
page 19)
Cleaning the magazine 10 and magazine slider
11.
Prevents the jamming of nails. – Blow out the mechanism of the
magazine/magazine slider daily with com-
pressed air.
Ensuring that the discharge lock-off 2 functions
properly.
Promotes your work safety and efficient usage of
the pneumatic tool.
– Blow out the mechanism of the discharge lock-
off daily with compressed air.
Lubricating the pneumatic tool.
Reduces the wear of the pneumatic tool. – Apply 2–3 drops of lubricant into air connec-
tor 8.
(See “Lubricating the Pneumatic Tool”,
page 19)
Draining the compressor.
Prevents the accumulation of dirt/ debris and
moisture in the pneumatic tool.
– Open the drain valve of the compressor tank.
Problem Cause Corrective Measure
The pneumatic tool is ready for operation
but no nails are discharged.
A nail is jammed in the shot duct. – Clear the jam.
(See “Clearing Jams”, page 19)
The magazine slider is 11 defective. – Clean and lubricate the magazine slider 11 as re-
quired and make sure that the magazine 10 is not
dirty/soiled.
The spring of the magazine slider is too week or de-
fective.
– Contact an authorised service agent for Bosch
power tools.
Have the component replaced there.
The fasteners being used are not permitted. – Use only original accessories.
Only the fasteners (nails, staples, etc.) specified
in table “Technical Data” may be used.
The magazine 10 is empty. – Refill the magazine.
(See “Loading the Magazine”, page 17)
The nails are discharged very slowly and
with too little pressure.
The rated pressure of the compressed-air supply is
too low.
– Increase the compressed-air supply. 8 bar may
not be exceeded.
The driver blade is damaged. – Use only the lubricants recommended by Bosch.
(See “Lubricating the Pneumatic Tool”, page 19)
The sealing ring of the piston is worn or damaged. – Contact an authorised service agent for Bosch
power tools.
Have the component replaced there.
The buffer is worn. – Contact an authorised service agent for Bosch
power tools.
Have the component replaced there.
The length and diameter of supply-air hose 15 do not
correspond with the data of this pneumatic tool.
– Use a supply-air hose with the correct dimensions.
(See “Technical Data”, page 16)
The supply-air hose 15 is bent/creased. – Correct the bend/crease in the supply-air hose.
OBJ_BUCH-1302-001.book Page 20 Tuesday, March 22, 2011 11:17 AM
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSK 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSK 64 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info