Manual Bosch GSK 64-34 (page 15 of 218) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544372

Zoom out

Zoom in

1/218

English | 15

Bosch Power Tools 1 609 929 X30 | (22.3.11)

English

Safety Notes

General Safety Rules for Pneumatic Tools

Read and observe all safety warnings and instruc-

tions. Failure to follow the following safety warnings

and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

Work area safety

fKeep work area clean and well lit. Cluttered or dark areas invite acci-

dents.

fDo not operate the pneumatic tool in explosive atmospheres, such

as in the presence of flammable liquids, gases or dusts. While work-

ing the workpiece, sparks can be created which may ignite the dust or

fumes.

fKeep children and bystanders away from your workplace while op-

erating the pneumatic tool. Distractions from other persons can

cause you to lose control over the pneumatic tool.

Pneumatic tool safety

fUse compressed air of Quality Class 5 in accordance with DIN ISO

8573-1 and a separate maintenance unit close to the pneumatic

tool. The compressed air supplied should be free of foreign material

and moisture to protect the pneumatic tool from damage, contamina-

tion, and the formation of rust.

fCheck the connections and the air supply lines. All maintenance

units, couplers, and hoses should conform to the product specifica-

tions in terms of pressure and air volume. Too low pressure impairs the

function of the pneumatic tool; too high pressure can result in material

damage and personal injury.

fProtect the hoses from kinks, restrictions, solvents, and sharp

edges. Keep the hoses away from heat, oil, and rotating parts. Im-

mediately replace a damaged hose. A defective air supply line may

result in a wild compressed-air hose and can cause personal injury.

Raised dust or chips may cause serious eye injury.

fMake sure that hose clamps are always tightened firmly. Loose or

damaged hose clamps may result in uncontrolled air escape.

Personal safety

fStay alert, watch what you are doing, and use common sense when

operating a pneumatic tool. Do not use a pneumatic tool while tired

or under the influence of drugs, alcohol, or medication. A moment

of inattention while operating a pneumatic tool may result in personal

injury.

fUse personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

fPrevent unintentional starting. Make sure that the pneumatic tool

is switched off before connecting it to the air supply, picking it up

or carrying it. When your finger is on the On/Off switch while carrying

the pneumatic tool or when connecting the pneumatic tool to the air

supply while it is switched on, accidents can occur.

fRemove any adjustment tools before switching on the pneumatic

tool. A wrench or key left attached to a rotating part of a pneumatic tool

may result in personal injury.

fDo not overreach. Keep proper footing and balance at all times.

This enables better control of the pneumatic tool in unexpected situa-

tions.

fDress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

fIf devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly

used. Use of dust collection can reduce dust-related hazards.

fDo not directly inhale the exhaust air. Avoid exposing the eyes to

exhaust air. The pneumatic tool’s exhaust air can contain water, oil,

metal particles and debris from the compressor. This can cause dam-

age to one‘s health.

Pneumatic tool use and care

fUse the clamping devices or a vice to secure and support the work-

piece. Holding the workpiece by hand or against your body will not al-

low for safe operation of the pneumatic tool.

fDo not overload the pneumatic tool. Use the pneumatic tool intend-

ed for your work. The correct pneumatic tool will do the job better and

safer at the rate for which it is designed.

fDo not use a pneumatic tool that has a defective On/Off switch. A

pneumatic tool that cannot be controlled with the switch is dangerous

and must be repaired.

fDisconnect the air supply before making any adjustments, chang-

ing accessories, or placing the pneumatic tool aside. This safety

measure prevents accidental starting of the pneumatic tool.

fStore idle pneumatic tools out of the reach of children. Do not allow

persons unfamiliar with the pneumatic tool or these instructions to

operate the device. Pneumatic tools are dangerous in the hands of un-

trained users.

fMaintain the pneumatic tool with care. Check for misalignment or

binding of moving parts, breakage of parts and any other condition

that may affect the pneumatic tool’s operation. Have damaged

parts repaired before using the pneumatic tool. Many accidents are

caused by poorly maintained pneumatic tools.

fUse the pneumatic tool, accessories, application tools, etc. accord-

ing to these instructions. Take into consideration the working con-

ditions and the activities to be carried out. Use of the pneumatic tool

for operations different from those intended could result in hazardous

situations.

Service

fHave your pneumatic tool repaired only through a qualified repair

person and only using original replacement parts. This will ensure

that the safety of the pneumatic tool is maintained.

WARNING

OBJ_BUCH-1302-001.book Page 15 Tuesday, March 22, 2011 11:17 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSK 64-34 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GSK 64-34 Manual

Product: