786166
12
Zoom out
Zoom in
Previous page
1/191
Next page
12 | English
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Batterya)
(2) Battery release buttona)
(3) On/off switch
(4) Chip deflector
(5) Handle (insulated gripping surface)
(6) Fastening screw for upper cutter
(7) Upper cutter
(8) Bottom cutter
(9) Set screw for bottom cutter
(10) Fastening screw for bottom cutter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless metal shears GSC 18V-16 E
Article number 3601J263..
Rated voltage V= 18
No-load stroke rate n₀ min−1 3200A)
Max. steel sheet cutting ca-
pacityB) mm 1.6
Smallest curve radius mm 20
Weight according to EPTA-
Procedure01:2014 kg 2.0–3.0C)
Recommended ambient tem-
perature during charging °C 0to+35
Permitted ambient temperat-
ure during operationD) and
during storage
°C –20to+50
Recommended rechargeable
batteries GBA 18V…
ProCORE18V…
Recommended chargers GAL 18…
GAX 18…
GAL 36…
A) Measured at 20–25°C with rechargeable
batteryGBA18V4.0Ah and depending on the battery's state of
charge as well as the power tool's operating temperature
B) Refers to steel sheets of up to 400N/mm2
C) Depends on battery in use
D) Limited performance at temperatures <0°C
Noise/Vibration Information
Noise emission values determined according to
EN62841‑2‑8.
Typically, the A-weighted sound pressure level of the power
tool is 77dB(A). Uncertainty K=3dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to EN62841‑2‑8:
ah=7.5m/s2, K=1.5m/s2.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Rechargeable battery
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
uUse only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
The rechargeablebattery has two locking levels to prevent
the battery from falling out if the battery releasebutton is
pressed unintentionally. The rechargeable battery is held in
place by a spring when fitted in the power tool.
1 609 92A 7XM | (26.07.2022) Bosch Power Tools
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSC 18V-16 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSC 18V-16 E in the language / languages: All languages as an attachment in your email.

The manual is 3.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info