Manual Bosch GSB 20-2 RCE (page 24 of 137) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

78438

Zoom out

Zoom in

1/137

1 609 929 M38 | (11.9.07) Bosch Power Tools

24 | English

Adjusting the Speed/Impact Frequency

(GSB 20-2 RE/GSB 20-2 RCE/GSB 20-2 RET)

The speed/impact rate of the switched on power

tool can be variably adjusted, depending on how

far the On/Off switch 7 is pressed.

Light pressure on the On/Off switch 7 results in

low speed/impact rate. Further pressure on the

switch increases the speed/impact rate.

Preselecting the Speed/Impact Frequency

(GSB 20-2 RE)

With the thumbwheel for speed preselection 8,

the required speed/impact frequency can be

preselected even during operation.

The required speed/impact frequency depends

on the material and the working conditions, and

can be determined through practical testing.

Electronic Speed Preselection

(GSB 20-2 RCE/GSB 20-2 RET)

With the thumbwheel for electronic speed prese-

lection 3, the required speed/impact frequency

can be selected even if the machine is running.

The required speed/impact frequency depends

on the material and the working conditions, and

can be determined through practical testing.

Constant Electronic Control

(GSB 20-2 RCE/GSB 20-2 RET)

The constant electronic control keeps the prese-

lected speed and impact rate nearly constant be-

tween no-load and load conditions.

Electronic Torque Limitation/Speed Preselec-

tion (Torque Control) (GSB 20-2 RET)

Drilling with speed preselection: Set

the selector switch 4 to the “Drilling”

symbol. The required speed can be

selected with the thumbwheel 3; it

can also be adjusted during opera-

tion.

Screwdriving with torque limitation:

Set the selector switch 4 to the

“Screwdriving” symbol. The effective

torque at the drill spindle can be var-

iable adjusted with the thumbwheel

3 during operation:

I=low torque, III=high torque.

The maximum speed is automatically adapted to

the adjusted torque.

If the preselected torque is reached during

screwdriving, the machine switches off; the drill-

ing tool no longer rotates. If the load on the ma-

chine is then removed with the On/Off switch 7

still pressed, the drilling tool continues to run on-

ly at very low speed for safety reasons.

After briefly releasing the On/Off switch 7, the

next screw can be driven in with the same

torque.

For screwdriving without torque lim-

itation, turn the thumbwheel 3 to the

right stop. This setting is required,

when the torque in position III is not

sufficient.

Working Advice

f Apply the power tool to the screw/nut only

when it is switched off. Rotating tool inserts

can slip off.

Tips

After longer periods of working at low speed, al-

low the machine to cool down by running it for

approx. 3 minutes at maximum speed with no

load.

For drilling in tiles, set the selector switch 2 to

the “Drilling” symbol. Do not switch over to the

symbol “Impact Drilling” or work with impact un-

til after drilling through the tile.

Use carbide tipped drill bits when working in

concrete, masonry and brick wall.

For drilling in metal, use only perfectly sharp-

ened HSS drill bits (HSS=high-speed steel). The

appropriate quality is guaranteed by the Bosch

accessories program.

Twist drills from 2,5–10 mm can easily be sharp-

ened with the drill bit sharpener (see accesso-

ries).

Soft Grip

The gripping surface (soft grip) 6 reduces the

danger of slipping and thereby improves the grip

on the machine and the handling.

At the same time, the rubber coating achieves a

vibration-reducing effect.

OBJ_BUCH-115-002.book Page 24 Tuesday, September 11, 2007 2:39 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSB 20-2 RCE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch GSB 20-2 RCE

Bosch GSB 20-2 RCE User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 136 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GSB 20-2 RCE Manual

Product: