786295
20
Zoom out
Zoom in
Previous page
1/287
Next page
20 | English
User interface (seefigureD)
The user interface(11) is used to select the working mode
and to indicate the status of the power tool.
Status indicator
(16) Meaning
Power tool switched off
Green Power tool switched on and ready to use
Yellow Warning message
Red Error message
Blue (flashing) Data transfer
Indicator: Jaw Cleaning/Checking Reminder
If the reminder(15) or(14) lights up, you must check the
jaws(23).
If required, clean the jaws(see "Clean the jaws (see
figuresE1E3)", page22).
Only reset the reminder once you have checked the jaws.
To do so, press and hold the RESET(19) button for
2seconds.
Selecting the working mode
The AUTO(18) button can be used to choose between two
working modes.
AUTO ON working mode:
To set a blind rivet, press the on/off switch(12) briefly
and then release it again. The riveting process is automat-
ically completed.
Advantage: Convenient riveting
AUTO OFF working mode:
To set a blind rivet, press and hold the on/off switch(12)
until the blind rivet is fully set and the rivet mandrel has
broken off. Then release the on/off switch in order to
complete the riveting process
Advantage: Quick riveting (depending on the blind rivet/
nosepiece combination that is used)
Working Advice
uThe power tool with built-in Bluetooth® Low Energy
Module is equipped with a radio interface. Local oper-
ating restrictions, e.g. in aircraft or hospitals, must be
observed.
uIn areas in which the Bluetooth® wireless technology
must not be used, the Bluetooth® Low Energy Module
must be switched off via the app.
LED worklight
The LED worklight(13) improves visibility in the immediate
work area. It is automatically switched on when the on/off
switch (12) is pressed.
Suspension device
You can use the hanging ring(3) to attach the power tool to a
suspension device (e.g. on a production line).
To do so, fold the hanging ring(3) upwards.
uRegularly check the condition of the hanging ring and
the catch in the suspension device.
Belt clip
You can use the belt clip(7) to conveniently secure the
power tool to your belt.
Connectivity functions
System Requirements for Using the App
System Requirements
Mobile device (tablet,
smartphone) Android6.0 (and newer)
iOS11 (and newer)
Installing and Setting up the App
You will need to install the device-specific app before you
can use the connectivity functions.
Download the app from the corresponding app store
(AppleApp Store, Google Play Store).
Note: You will need to have a user account with the relev-
ant app store to do this.
App name iOS Android
Bosch Toolbox
Then select the MyTools or Connectivity sub-item in the
app.
The display of your mobile device shows you all of the
subsequent steps required to connect the power tool to
the mobile device.
Data Transfer via Bluetooth®
The built-in Bluetooth® Low Energy Module sends a signal at
regular intervals. Depending on ambient conditions, multiple
transmission intervals may be required before the power
tool is detected. If the power tool is not detected, check the
following:
Is the distance to the mobile device too great?
Reduce the distance between the mobile device and the
power tool.
Is the coin cell for the built-in Bluetooth® Low Energy Mod-
ule weak or drained?
Contact an authorised after-sales service centre for
Bosch power tools to replace the coin cell.
Switch Bluetooth® off and on again on your mobile device.
Check whether the power tool has now been detected.
Functions in Conjunction with the Power Tool
In conjunction with the Bluetooth® Low Energy module, the
following connectivity functions are available for the power
tool:
Registration and personalisation
1 609 92A 7R1 | (22.06.2022) Bosch Power Tools
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GRG 18V-16 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GRG 18V-16 C in the language / languages: All languages as an attachment in your email.

The manual is 5.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info