592509

Bosch GPO 14 CE Professional Manual

14
Zoom out
Zoom in
Previous page
1/201
Next page
English | 15
Bosch Power Tools 1 609 92A 114 | (16.12.14)
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for polishing and brushing metal and
coated surfaces as well as for polishing stone without the use
of water.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Fastening screw for bow handle
2 Bow handle (insulated gripping surface)
3 Spindle lock button
4 Thumbwheel for speed preselection
5 On/Off switch
6 Grinder spindle
7 Auxiliary handle (insulated gripping surface)*
8 Clamping mandrel*
9 Clamping flange*
10 Buffing disc*
11 Clamping nut*
12 Spacer discs*
13 Polishing plate*
14 Round nut*
15 Lamb’s wool bonnet for polishing plate*
16 Polishing sponge*
17 Lambskin polishing bonnet for polishing sponge*
18 Rubber sanding plate*
19 Sanding sheet*
20 Felt polishing disc*
21 Cup brush*
22 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Polishing: a
h
=6.0m/s
2
, K=1.5 m/s
2
,
Disk sanding: a
h
=4.5m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-3.
Polisher GPO 14 CE
Article number
3 601 C89 0..
Rated power input
W1400
Output power
W800
Rated speed
min
-1
3000
Speed control adjustment
min
-1
750 – 3000
Sanding pad diameter, max.
mm 180
Thread of grinder spindle
M 14
Max. spindle length
mm 21
Weight according to
EPTA-Procedure 01/2003
kg 2.5
Protection class
/II
The values given are valid for a nominal voltage [U] of 230V. For differ-
ent voltages and models for specific countries, these values can vary.
OBJ_BUCH-1284-003.book Page 15 Tuesday, December 16, 2014 4:09 PM
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GPO 14 CE Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GPO 14 CE Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info