Manual Bosch GPB 18V-2 SC (page 18 of 259) (All languages)

786238

Zoom out

Zoom in

1/259

18 | English

Setting/Saving FM Radio Stations

To select the audio source FM radio stations, press the

source button(7) untilFM orFM2 appears on the audio

source indicator(b).

GPB18V‑2C: The frequency of the current station will ap-

pear on the radio frequency indicator(d).

GPB18V-2SC: The frequency of each current station will

appear on the top line of the multi-function indicator(k). The

additional information shown on the bottom line of the multi-

function indicator can be set with the menu function.

If there is sufficiently good reception of a suitable signal, the

radio will automatically switch to stereo reception, and the

stereo indicator(h) will appear in the display. The reception

type can be changed to mono reception with the menu func-

tion.

– To set a specific station, turn the source button(7)

(TUNE) until the required frequency or the required sta-

tion is shown in the display.

– To search for the next station with high signal

strength, briefly press the seek button (scan down)(10)

or the seek button (scan up)(9). The next station found is

shown in the display and played back.

– To search for all stations with high signal strength,

press the seek button (scan down)(10) or the seek but-

ton (scan up)(9) for longer than half a second. Any sta-

tion found is played back for 5 seconds, then the search

is continued until the end of the frequency band. To can-

cel the station search, briefly press the seek button (scan

down)(10) or the seek button (scan up)(9).

– To save a set station, press the preset button(5) of the

required storage space until the number of the storage

space appears in the storage space indicator(c).

If the four storage spaces of theFM audio source are oc-

cupied, then switch to theFM2 audio source, in which

four further storage spaces are available, by pressing the

source button(7). Please note that you must reset the re-

quired station after switching to save the change.

– To automatically search for and save the stations with

the best reception (AUTOSTORE), press the seek button

(scan down)(10) and the seek button (scan up)(9) sim-

ultaneously. The radio will check all receivable stations

and save the four stations with the best reception in pre-

set spaces 1 to 4. Please note that stations that have

already been saved will be overwritten here where neces-

sary.

Once the search has finished, the station saved in preset

space 1 will be played back.

– To start playback of a saved station, briefly press one of

the preset buttons(5). The number of the storage space

will appear on the storage space indicator(c). If required,

switch between audio sourcesFM andFM2 by pressing

the source button(7), to allow you to go back to all saved

stations.

Setting the Rod Antenna

The radio is supplied with a fitted rod antenna(6). For FM

radio operation, point the rod antenna in the direction that

enables the best reception.

If the reception is insufficient, position the radio at a differ-

ent location that enables better reception.

Note: When operating the radio in the direct vicinity of ra-

dio-communication equipment or radio transceivers, or

other electronic equipment, the radio reception can be sub-

ject to interference.

Connecting External Audio Sources via AUX

Remove the protective cap of the connector

compartment(15) and insert the 3.5‑mm connector of the

AUX cable(25) into the AUXIN socket(24). Connect the

AUX cable to a suitable audio source.

To play back the AUX audio source, press the source

button(7) untilAUX appears on the audio source

indicator(b).

After removing the AUX cable connector, reattach the pro-

tective cap of the connector compartment(15) to protect

against dirt/debris.

If one of the preset buttons(5) is pressed during AUX opera-

tion, the radio will switch to the station that was saved in the

last used radio operating mode.

Playing Back/Controlling External Audio Sources via

Bluetooth®

To play back an audio source (e.g. smartphone) via

Bluetooth®, either press the source button(7) until the

Bluetooth® indicator(a) appears in the display, or briefly

press the Bluetooth® button(11) regardless of the current

audio source.

Whilst a connection is being established or during the search

for a connection, theBluetooth®indicator(a) will flash.

GPB18V‑2SC:<Pairing> will appear on the multi-function

indicator(k).

– If the radio has already been connected to an external au-

dio source via Bluetooth® and if this audio source is avail-

able, a connection to this audio source will automatically

be established.

– If no saved audio sources are available, the search pro-

cess will start. Activate the new connection via the ex-

ternal audio source. For smartphones, that is generally

possible via the settings in the Bluetooth® menu. The ra-

dio will appear as an available source under the name

GPB18V‑2C xxxx or GPB18V‑2SC xxxx. Please ob-

serve the operating instructions for your audio source/

smartphone.

– If an available connection to an audio source via

Bluetooth® needs to be ended and a new connection

needs to be searched for (PAIRING), press the

Bluetooth® button(11) for longer than 0.5seconds. Ac-

tivate the connection as described above.

As soon as an audio source is connected via Bluetooth®, the

Bluetooth® indicator(a) will light up continuously.

GPB18V‑2SC: The name of the device connected via

Bluetooth® is displayed on the top line of the multi-function

1 609 92A 7XU | (27.05.2022) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GPB 18V-2 SC in the language / languages: All languages as an attachment in your email.

The manual is 6.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GPB 18V-2 SC Manual

Product: