786238
16
Zoom out
Zoom in
Previous page
1/259
Next page
16 | English
The lithium-ion battery is protected against deep discharge
by "Electronic Cell Protection (ECP)". A protective circuit
switches the radio off when the rechargeable battery is
drained.
uDo not switch the radio back on after it has been
switched off by the protective circuit. This can damage
the battery.
Replacing a Rechargeable Battery
Disengage the locking lever(13) of the battery cover and
open the battery cover(12) flap.
To remove a rechargeable battery, press the battery release
button(16) and pull the rechargeable battery out of the bat-
tery compartment. Do not use force to do this.
To insert a rechargeable battery, push it into the battery
holder(14) such that the connections of the rechargeable
battery are in line with the connections of the battery holder.
Allow the rechargeable battery to engage.
Close the battery cover(12) and lock it.
Battery Charge Indicator
When the rechargeable battery is inserted, you can see the
state of charge of the battery(17) in the display. When the
rechargeable battery is removed, you can see this on the
battery itself.
Battery Charge Indicator in the Display
The battery charge indicator(i) will appear in the display as
soon as a rechargeable battery with sufficient voltage is in-
serted and the radio is not connected to the mains supply via
the power supply(20).
Display Capacity
80−100%
60−80%
40−60%
20−40%
5−20%
0−5%
Battery Charge Indicator on the Rechargeable Battery
If the rechargeable battery is removed from the radio, its
state of charge may be indicated by the green LEDs of the
battery charge indicator on the rechargeable battery.
Press the button for the battery charge indicator or to
show the state of charge.
If no LED lights up after pressing the button for the battery
charge indicator, then the battery is defective and must be
replaced.
Battery model GBA 18V...
LEDs Capacity
3× continuous green light 60−100%
LEDs Capacity
2× continuous green light 30−60%
1× continuous green light 5−30%
1× flashing green light 0−5%
Battery model ProCORE18V...
LEDs Capacity
5× continuous green light 80−100%
4× continuous green light 60−80%
3× continuous green light 40−60%
2× continuous green light 20−40%
1× continuous green light 5−20%
1× flashing green light 0−5%
Operation with power supply (see figureA)
uUse only the power supply listed in the technical data.
This is the only this way to ensure proper operation of the
radio.
uPay attention to the mains voltage. The voltage of the
power source must match the voltage specified on the
type plate of the power supply.
Open the protective cap of the connector
compartment(15). Insert the plug-in connector(21) of the
power supply into the connection socket(22) (DCIN18V).
Connect the power supply to the mains supply.
After removing the plug-in connector(21), reattach the pro-
tective cap of the connector compartment(15) to protect
against dirt/debris.
Changing the button cell
To save the time and other settings on the radio, a button
cell must be inserted as a back-up battery.
Before using the radio for the first time, remove the protect-
ive strip of the inserted button cell.
Disengage the locking lever(13) of the battery cover and
open the battery cover(12) flap.
If required, remove the rechargeable battery(17).
Pull the protective film out under the cover(18) of the but-
ton cell.
Replace the button cell once the radio no longer saves the
time and the display gets weaker.
To do this, turn the cover(18) of the button cell anticlock-
wise (e.g. with a coin) and remove the cover. Insert a new
button cell.
When doing so, ensure that the polarity is correct according
to the illustration on the inside of the cover(18).
1 609 92A 7XU | (27.05.2022) Bosch Power Tools
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GPB 18V-2 SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GPB 18V-2 SC in the language / languages: All languages as an attachment in your email.

The manual is 6.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info