592048
11
Zoom out
Zoom in
Previous page
1/124
Next page
English | 11
Bosch Power Tools 1 609 92A 0B4 | (12.9.13)
Product Features
The numbering of the product features refers to the illustra-
tion of the inspection camera on the graphics page.
1 Hand unit
2 Increase-brightness button “+”
3 On/Off button
4 Reduce-brightness button “–”
5 Display
6 Camera cable
7 Camera head
8 Camera lens
9 Illumination light in camera head
10 Battery pack*
11 Battery unlocking button
12 Camera cable, extension*
13 Socket sleeve of camera connection
14 Camera connection
15 Magnet
16 Hook
17 Mirror
18 Video output socket
19 Video cable
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Assembly
Before any work on the inspection camera itself (e.g.
assembling, maintenance, etc.) as well as when trans-
porting and storing, remove the battery from the in-
spection camera.
Battery Charging
Use only the battery chargers listed on the graphics
page. Only these battery chargers are matched to the lith-
ium-ion battery used in your inspection camera.
Note: The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The battery is equipped with a NTC temperature control
which allows charging only within a temperature range of be-
tween 0 °C and 45 °C. A long battery service life is achieved
in this manner.
Battery Charge-control Indication
When the inspection camera is switched on, the charge con-
dition of the battery is indicated on the display 5:
Removing the battery
To remove the battery 10, press the battery unlocking but-
tons 11 and pull the battery toward the rear out of the inspec-
tion camera. Do not exert any force when doing this.
Mounting the Camera Cable (see figure A)
For operation of the inspection camera, the camera cable 6
must be mounted to the hand unit 1.
Insert the camera cable 6 into the camera connection 14 in
such a manner that the pin of the camera cable engages into
the opening of the camera connection as shown in the figure.
Slide the socket sleeve 13 on the camera connection over the
camera cable and hand-tighten in clockwise direction.
To remove the camera cable 6, unscrew socket sleeve 13 in
anticlockwise direction and pull the camera cable off.
Mounting the Camera Cable Extension (Accessory)
To mount a camera cable extension 12, the mounted camera
cable 6 must be removed.
Then, mount the extension 12 onto camera connection 14 as
described under “Mounting the Camera Cable” and tighten.
If required, further extensions can be mounted in the same
manner. However, the image quality decreases when exceed-
ing a total length approx. 10 m (incl. camera cable).
Digital Inspection Camera GOS 10,8 V-LI
Article number
3 601 B41 000
Rated voltage
V= 10.8
Operating temperature
°C –20...+65
Storage temperature
(hand unit without battery)
°C –30...+80
Relative humidity
%595
1)
Smallest bending radius of camera
cable
mm 120
Diameter of camera head
mm 17/9.5
Depth-of-field range of camera
lens mm 38 –
Display size
mm 68.6
Display resolution
320 x 240
Format of video output
NTSC
Operating life time, approx.
h/Ah 11.5
Weight according to
EPTA-Procedure 01/2003
kg 0.68
Dimensions
(length x width x height) mm 166 x 66 x 45
1) Free of moisture condensation
Indication Capacity
> 1/2
< 1/2
Reserve
OBJ_BUCH-1311-004.book Page 11 Thursday, September 12, 2013 1:56 PM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GOS 10.8 V-LI Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GOS 10.8 V-LI Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info