Manual Bosch GNF 65 A (page 11 of 105) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544272

Zoom out

Zoom in

1/105

English | 11

Bosch Power Tools 1 609 929 N87 | (13.2.09)

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

The vacuum cleaner must be approved for the

extraction of masonry dust. Bosch provides suit-

able vacuum cleaners.

The machine can be plugged directly into the re-

ceptacle of a Bosch all-purpose vacuum cleaner

with remote starting control. The vacuum clean-

er starts automatically when the machine is

switched on.

Mount the elbow 11 onto the vacuum connec-

tion 10 and connect a vacuum hose 12 (accesso-

ry). Connect the vacuum hose 12 with a vacuum

cleaner (accessory). An overview for the con-

nection of various vacuum cleaners can be

found at the end of these instructions.

Information for the Use of Wall Chasers

Please observe the following notes in order to

reduce the dust emissions occurring while

working.

– Use only the combinations of wall chaser and

dust-category M vacuum cleaner recom-

mended by Bosch. Other combinations can

lead to insufficient dust collection and sepa-

ration.

– Observe the operating instructions of the

vacuum cleaner for maintenance and clean-

ing of the vacuum cleaner, including the fil-

ter. Empty dust collection containers imme-

diately once full. Clean the filters of the

vacuum cleaner regularly and always insert

the filters completely into the vacuum clean-

er.

– Only use vacuum hoses as intended for by

Bosch. Do not manipulate the vacuum hose.

When rocks or chunks of stone/masonry are

drawn into the vacuum hose, cease work and

clean the vacuum hose immediately. Prevent

the vacuum hose from being bent or creased.

– Use the wall chaser only according to its in-

tended use.

– Only use tools that are in perfect condition.

Decrease in work progress is noticeable

whilst using worn tools.

– Observe the general requirements for con-

struction sites.

– Provide for good ventilation.

– Ensure that the working range/area is free of

obstructions. For longer slots, the vacuum

cleaner must be guided along in time, with-

out obstructions in the path.

– Wear hearing protection, protective goggles,

dust mask and gloves as required. As dust

mask, use at least a particle-filtering class

FFP 2 half-mask.

– Use a suitable vacuum cleaner for cleaning

the workplace. Prevent settled dust from be-

ing swirled up by sweeping.

Adjusting the Protection Guard

The protection guard 8 can be adjusted within

limits.

Loosen clamping lever 14 and turn the protec-

tion guard 8 according to the working condi-

tions. Pay attention not to misadjust screw 13.

Afterwards, tighten the protection guard 8 with

clamping lever 14 again.

Mounting the Auxiliary Handle

Depending on the working manner, screw the

auxiliary handle 4 to the right or left on the aux-

iliary-handle holder.

After loosening locking screw 6, the auxiliary-

handle holder can be adapted to the respective

working position in 30° steps.

When tightening locking screw 6, take care that

the four positioning pins on the auxiliary-handle

holder are seated in the holes of the protection

guard 8.

OBJ_BUCH-916-001.book Page 11 Friday, February 13, 2009 11:21 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GNF 65 A in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GNF 65 A Manual

Product: