591844
10
Zoom out
Zoom in
Previous page
1/92
Next page
10 | English
1 619 929 L07 | (16.10.12) Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the drill stand and leave it open.
Intended Use
In conjunction with the GBM 32-4 rotary drill, the drill stand is
intended for drilling precise holes in magnetizable materials,
such as steel.
Other drills may not be used, as these cannot be fastened suf-
ficiently safe.
The drill stand can be used horizontal and vertical as well as
overhead. Pay attention that the clamping surface is flat, cor-
responds at least with the base surface of the drill stand and
that the material surface is at least 8 mm thick, magnetizable
and clean.
Product Features
The numbering of the product features refers to the illustra-
tion of the drill stand on the graphics pages.
1 Drilling lever with drilling-depth scale
2 Screw for the side holder
3 Side holder for drill
4 Drill fixture
5 Screw for drill fixture
6 Motor On/Off switch
7 Socket outlet for drill
8 Magnet On/Off switch
9 Insulated gripping surfaces
10 Safety chain
11 Lock nut
12 Set screw for adjustment of the guide rail
13 Open-end spanner
14 Allen key
A complete overview of accessories can be found in our accesso-
ries program.
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
27.08.2012
Assembly
Inserting the Drill
Remove the auxiliary handle from your drill, if required (see
the operating instructions of the drill).
Loosen screw 5 using an Allen key. Insert the drill with the drill
collar from above into the drill fixture 4 to the stop. Mount
screw 2 in order to connect the drill with the side holder 3.
Hand-tighten screw 5 using an Allen key.
Check the tight seating of the drill in the drill fixture.
When the drill is not securely fastened, serious injury may
result.
Mounting the Safety Chain (see figure A)
For all work being performed in inclined, vertical or overhead
positions, secure the drill stand against falling down with the
provided safety chain 10.
Before using the safety chain, check its proper func-
tion. Never use a damaged safety chain; replace a dam-
aged safety chain immediately.
Fasten the safety chain in such a manner that the drill stand
moves away from you, should it come undone.
Fasten the safety chain around the carrying handle of the drill
stand with as little play as possible.
Magnetic drill stand GMB 32
Article number
0 601 193 0..
Rated power input
W95
Holding force of the magnet
kN 25
Max. drilling dia.
(GBM 32-4, MK3 tool holder)
–Twist drill bit
–Core bit
mm
mm
32
12 – 60
Drill stroke, max.
mm 223
Please observe the article number on the type plate of your drill stand.
The trade names of individual drill stands may vary.
Diameter of drill fixture mm 65
Weight according to
EPTA-Procedure 01/2003 kg 26
Protection class
/I
Dr. Egbert Schneider
Senior Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Magnetic drill stand GMB 32
Please observe the article number on the type plate of your drill stand.
The trade names of individual drill stands may vary.
OBJ_BUCH-1761-001.book Page 10 Tuesday, October 16, 2012 1:32 PM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GMB 32 Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GMB 32 Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info