766856
16
Zoom out
Zoom in
Previous page
1/257
Next page
16 | English
The ambient temperature and the workpieces to be glued
must not be colder than +5°C and not warmer than +50°C.
Materials that cool the adhesive down quickly should be
warmed first with a hot air gun.
Gluing (seeimageA)
To open the glue stick compartment, push the slider(5) in the
direction of . Insert the glue stick(3) suited to the material
in the glue stick compartment(4) .
Switch the glue pen on and allow it to heat up. The light-up
ring (6) will flash slowly.
As soon as the light-up ring (6) is continuously lit up, the glue
pen is ready to use.
Move the slider (5) in direction with moderate pressure to
deliver the adhesive. If the slider hits the front end, the glue
stick (3) has been used up. Insert a new glue stick.
Apply the adhesive to one side (see "Application Tips",
page16).
Press the materials you wish to glue together against each
other for around 10 to 30 seconds immediately after applying
the adhesive. Correcting the bonding location is still possible
at this point.
The bond is stable after approx. two minutes of cooling time.
uMake sure you do not come into contact with the hot ad-
hesive. Use a silicone mat to press permeable materials to-
gether.
Application Tips
Material/workpiece Recommendation
Long workpieces with large
surface areas Apply adhesive in dots
Flexible materials
(e.g. textiles) Apply adhesive in lines
Note: If a new glue stick is inserted, it will push the rest of the
previous glue stick out before the new colour or material
comes out. Please take note of this fact when changing the
colour or material of the glue stick.
uDo not use flammable solvents to clean the bonding loc-
ations. The hot glue could ignite any solvent residue or re-
lease hazardous fumes.
Adhesive residue on clothing cannot be removed.
The bonding locations can be painted.
Errors – Causes and Corrective Measures
Problem Cause Corrective meas-
ure
Glue pen does
not work. Zinc-carbon batter-
ies (R6) used. Use NiMH batteries
(HR6).
Glue pen only op-
erates for a short
time
Alkali-manganese
batteries (LR6) used. Use NiMH batteries
(HR6).
Glue stick feed is
sluggish. Glue pen has not fin-
ished heating up. Let the nozzle heat
up for 60s.
Feed is too fast
Batteries are weak Charge batteries
1 609 92A 552 | (13.03.2020) Bosch Power Tools
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Gluey at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Gluey in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info