766856
15
Zoom out
Zoom in
Previous page
1/257
Next page
English | 15
Inserting Batteries
It is recommended that you use NiMH batteries to operate the
glue pen.
uDo not use lithium-ion batteries. There is a risk of explo-
sion.
Unscrew the battery compartment cover (7) and insert the
batteries. When doing so, ensure that the polarity is correct
according to the illustration on the inside of the battery com-
partment.
If the light-up ring (6) flashes quickly, the batteries are weak.
Charge the batteries.
Always replace all the batteries at the same time. Only use bat-
teries from the same manufacturer and which have the same
capacity.
uTake the batteries out of the glue pen when you are not
using it for a prolonged period of time. The batteries can
corrode and self-discharge during prolonged storage.
Operation
Starting Operation
Switching On and Off
To switch on the glue pen, press the on/off button (8) until
the light-up ring (6) begins to flash.
The light-up ring (6) will flash slowly during the heating pro-
cess. When it is continuously lit up, the glue pen is ready to
use.
To switch off the glue pen, press and hold the on/off button
(8) until the light-up ring goes out.
Note: The glue pen will switch itself off automatically after a
few minutes to save energy.
uPlace the glue pen down in a safe place after use and let
it cool down completely before packing it away. The hot
nozzle can cause damage.
Working Advice
uKeep people and animals away from the hot adhesive
and the nozzle tip. Adhesive and nozzle tip will heat up to
150°C, posing a risk of burns. If hot adhesive comes into
contact with skin, immediately hold the affected area under
a stream of cold water for several minutes. Do not try to re-
move the hot adhesive from the skin.
Only use adhesives that have been recommended by the man-
ufacturer of the glue pen.
Only use low-temperature glue sticks (with melting points of
between 110 and 150°C). Do not use glue sticks intended for
high gluing temperatures (170–200°C).
Adhesive bonds can become unstuck when they are affected
by moisture.
Preparing for Gluing
The bonding locations must be clean, dry and free from
grease.
The materials to be glued together and the work surface must
not be easily ignited or flammable.
Test whether heat-sensitive materials are suitable beforehand
on a sample workpiece.
Bosch Power Tools 1 609 92A 552 | (13.03.2020)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Gluey at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Gluey in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info