Manual Bosch gks 66 ce (page 18 of 96) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

382835

Zoom out

Zoom in

1/96

English - 6

Parallel Guide

The parallel guide 12 enables exact cuts along a

work piece edge and cutting strips of the same di-

mension.

Guide Rail (accessory)

(see figure )

The guide rail 26 enables particularly exact cut-

ting, both vertically and mitred to 45°.

The adhesive coating prevents the guide rail from

slipping and protects the surface of the work

piece. The hard anodised coating of the guide rail

allows the circular saw to glide easily.

The rubber lip on the guide rail serves as a splin-

ter guard, which avoids fraying of the surface

when sawing wooden materials. For this, the

teeth of the saw blade must lie directly against

the rubber lip.

For mitre-cuts using the guide rail, a slide

shoe 30 (accessory) is required, which is clipped

on underneath the base plate 14.

Attach the guide rail with the screw clamps 25 in

a secure fashion.

The guide rail 26 must not protrude over

the workpiece on the side of the cut.

Depending on the cut, place the machine with the

first or second groove of the slide shoe (Figures I

and II) onto the guide rail 26, switch on and move

towards the material at a moderate speed.

Note: Two guide rails can be connected to one

with use of the connection piece 27 (acces-

sory). Clamping is carried out with the four

screws located in the connection piece.

■ Before any work on the machine itself, pull

the mains plug.

☞

For safe and proper working, always keep

the machine and the ventilation slots clean.

The retracting blade guard must always be able

to move freely and freely and retract automati-

cally. Therefore, always keep the area around the

retracting blade guard clean. Remove dust and

chips by blowing out with compressed air or with

a brush.

Saw blades that are not coated can be protected

against corrosion with a thin coat of acid-free oil.

Before use, the oil must be removed again, oth-

erwise the wood will become soiled.

Resin and glue residue on the saw blade produce

poor cuts. Therefore, clean the saw blade imme-

diately after use.

If the machine should fail despite the care taken

in manufacturing and testing procedures, repair

should be carried out by an after-sales service

centre for Bosch power tools.

In all correspondence and spare parts orders,

please always include the 10-digit order number

given on the nameplate of the machine.

WARNING! Important instructions for con-

necting a new 3-pin plug to the 2-wire cable.

The wires in the cable are coloured according to

the following code:

Do not

connect the blue or brown wire to the

earth terminal of the plug.

Important: If for any reason the moulded plug is

removed from the cable of this machine, it must

be disposed of safely.

Tips

I II

0°-Cut 1 –45°-Cut

30 30

Maintenance and Cleaning

strain relief

live = brown

neutral = blue

To be fitted

by qualified

professional only

1 609 929 535 - Buch Seite 6 Dienstag, 16. September 2003 11:34 11

18 • 1 609 929 535 • TMS • 10.09.03

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gks 66 ce in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gks 66 ce Manual

Product: