786476
14
Zoom out
Zoom in
Previous page
1/185
Next page
14 | English
Planer GHO 16-82 GHO 26-82 D
Rated power input W 630 710
No-load speed min-1 18,000 18,000
Cutting depth mm 0–1.6 0–2.6
Rebate depth mm 0–9 0–9
Max. planing width mm 82 82
Weight according to EPTA-Procedure01:2014 kg 3.4 3.4
Protection class / II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Noise/vibration information
Noise emission values determined according to
EN62841-2-14.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 84dB(A); sound power level
95dB(A). Uncertainty K=3dB.
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to EN62841-2-14
ah=8m/s2, K=1.5m/s2,
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Fitting
uPull the plug out of the socket before carrying out any
work on the power tool.
Changing the planer blades
uTake care when changing the planer blade. Do not pick
up the planer blade by the cutting edges. You may be
injured by the sharp cutting edges.
Use only original Bosch HM/TC planer blades.
The hard metal (HM/TC) planer blade has two cutting edges
and can be turned. If both cutting edges become blunt, the
planer blade (13) needs to be changed. The HM/TC planer
blade must not be resharpened.
Removing the planer blade (see figure A)
To turn or replace the planer blade (13), turn the blade head
(10) until it is parallel to the planer base plate (7).
Loosen the two fastening screws (12) using the hex key
(14) (approx. 1–2 turns).
If necessary, loosen the clamping element (11) by
lightly striking it with an appropriate implement, e.g. a
wooden wedge.
Use a piece of wood to push the planer blade (13) to
the side and out of the blade head (10).
Fitting the planer blade (see figure B)
The guide groove on the planer blade ensures a constant,
even height setting when changing or turning the blade.
If necessary, clean the knife seat in the clamping element
(11) and the planer blade (13).
When fitting the planer blade, ensure that it is correctly
seated in the mounting guide of the clamping element (11).
The planer blade must be fitted and aligned with the centre
of the planer base plate (7). Then tighten the two fastening
screws (12) with the hex key (14).
Note: Check that the fastening screws (12) are firmly
tightened before starting operation. Turn the blade head
(10) by hand and ensure that the planer blade is not brush-
ing against anything.
Dust/Chip Extraction
The dust from materials such as lead paint, some types of
wood, minerals and metal can be harmful to human health.
Touching or breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the user or in
people in the near vicinity.
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
Use a dust extraction system that is suitable for the ma-
terial wherever possible.
1 609 92A 7X9 | (03.08.2022) Bosch Power Tools
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GHO 26-82 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GHO 26-82 D in the language / languages: All languages as an attachment in your email.

The manual is 3.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info