786476
13
Zoom out
Zoom in
Previous page
1/185
Next page
English | 13
Safety instructions for planers
uWait for the cutter to stop before setting the tool
down. An exposed rotating cutter may engage the sur-
face leading to possible loss of control and serious injury.
uHold the power tool by insulated gripping surfaces,
because the cutter may contact its own cord. Cutting a
"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
uUse clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
the workpiece by your hand or against the body leaves it
unstable and may lead to loss of control.
uOnly bring the power tool into contact with the work-
piece when switched on. Otherwise there is danger of
kickback if the cutting tool jams in the workpiece.
uDo not allow the chip ejector to come into contact with
your hands. You may be injured by rotating parts.
uNever plane over metal objects, nails or screws. Cut-
ters and cutter shafts could become damaged and cause
increased vibration.
uUse suitable detectors to determine if utility lines are
hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
uWhile working, always hold the planer in such a way
that the planer base plate lies flat against the work-
piece. Otherwise the planer could slip and cause injury.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
uHold the power tool firmly with both hands and make
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for planing wood-based materials
such as beams and boards while resting firmly on the work-
piece. It is also suitable for chamfering edges and for rebat-
ing.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Cutting depth scale
(2) Knob for setting the cutting depth (insulated gripping
surface)
(3) Chip ejector (GHO26-82D: Either right or left)
(4) Lock-off function for on/off switch
(5) On/off switch
(6) Changeover lever for chip ejector direction
(GHO26-82D)
(7) Planer base plate
(8) V-groove
(9) Handle (insulated gripping surface)
(10) Blade head
(11) Clamping element for planer blade
(12) Fastening screw for planer blade
(13) HM/TC planer blade
(14) Hex key
(15) Extraction hose (dia. 35mm)a)
(16) Chip/dust baga)
(17) Parallel guide
(18) Scale for rebate width
(19) Locking nut for rebate width setting
(20) Fastening screw for parallel/angle guide
(21) Angle guidea)
(22) Locking nut for angle setting
(23) Fastening screw for rebate depth guide
(24) Rebate depth guidea)
(25) Parking rest
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Planer GHO 16-82 GHO 26-82 D
Article number 3601EA40.. 3601EA43..
Bosch Power Tools 1 609 92A 7X9 | (03.08.2022)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GHO 26-82 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GHO 26-82 D in the language / languages: All languages as an attachment in your email.

The manual is 3.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info