78670
22
Zoom out
Zoom in
Previous page
1/122
Next page
1 609 929 M67 | (12.11.07) Bosch Power Tools
22 | English
Reference Values for Maximum Screw/Bolt Tightening Torques
Calculated from the tensional cross-section; utilization of the yield point 90 % (with friction coefficient
μ
total
= 0.12). As a control measure, always check the tightening torque with a torque wrench.
Tips
Before screwing larger, longer screws into hard
materials, it is advisable to predrill a pilot hole
with the core diameter of the thread to approx.
2
/
3
of the screw length.
Belt Clip (see figure D)
With the belt clip 4, the machine can be hung on-
to a belt. The user has both hands free and the
machine is always at hand.
The belt clip 4 can be attached and screwed to ei-
ther side of the machine.
The belt clip 4 will automatically draw out when
pressing both release buttons. To dismount the
belt clip 4, remove the complete unit by unscrew-
ing the fastening screw.
Always tighten the fastening screw after mount-
ing the belt clip 4.
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine (e. g., main-
tenance, tool change, etc.) as well as during
transport and storage, set the rotational di-
rection switch to the centre position. Unin-
tentional actuation of the On/Off switch can
lead to injuries.
f For safe and proper working, always keep
the machine and ventilation slots clean.
Replacing the Carbon Brushes (see figure E)
Check the length of the carbon brushes approx.
every 2
3 months and replace the carbon brush-
es if required.
Never replace only a single carbon brush!
Criteria for replacement of the carbon brushes: A
dotted or broken line is visible on one of the large
side surfaces of each carbon brush. When either
of both carbon brushes is used up to this line,
then both carbon brushes should be replaced im-
mediately in order to protect the armature
against possible damage.
Note: Use only carbon brushes supplied by
Bosch and intended specifically for your product.
Unscrew the caps 12 using a suitable screw-
driver.
Property Classes ac-
cording to DIN 267
Standard Screws/Bolts High-strength
Bolts
3.6 4.6 5.6 4.8 6.6 5.8 6.8 6.9 8.8 10.9 12.9
M 6
2.71 3.61 4.52 4.8 5.42 6.02 7.22 8.13 9.7 13.6 16.2
M 8
6.57 8.7 11 11.6 13.1 14.6 17.5 19.7 23 33 39
M 10
13 17.5 22 23 26 29 35 39 47 65 78
M 12
22.6 30 37.6 40 45 50 60 67 80 113 135
M 14
36 48 60 65 72 79 95 107 130 180 215
M 16
55 73 92 98 110 122 147 165 196 275 330
M 18
75 101 126 135 151 168 202 227 270 380 450
M 20
107 143 178 190 214 238 286 320 385 540 635
OBJ_BUCH-595-001.book Page 22 Monday, November 12, 2007 4:15 PM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GDS 14,4 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GDS 14,4 V in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info