591908
12
Zoom out
Zoom in
Previous page
1/208
Next page
12 | English
1 609 92A 1A3 | (1.6.15) Bosch Power Tools
Safety Warnings for Working without Drill Stand
Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
If the application tool should become blocked, switch
the machine off. Loosen the application tool.
Before switching on the power tool, make sure that the
application tool moves freely. When switching on with a
blocked drilling tool, high torque reaction can occur.
Safety Warnings for Working with Drill Stand
Never leave the machine before it has come to a com-
plete stop. Cutting tools that are still running can cause in-
juries.
Safety Warnings for Wet Drilling
Never operate the machine without the portable resid-
ual current device (PRCD) provided.
Products sold in GB only: Never operate the 110 V exe-
cution of the machine without isolation transformer ac-
cording to EN/IEC 61558-1 and EN/IEC 61558-2-23.
The isolation transformer must have a grounded earth
wire on the secondary winding side.
Before starting work, check the proper function of the
portable residual current device (PRCD). Have a dam-
aged portable residual current device (PRCD) repaired
or replaced by your Bosch after-sales service agent.
Pay attention that neither persons in the working area
nor the power tool itself come into contact with the wa-
ter that comes out.
When wet drilling over-
head, the escaping water
must be collected. To do
this, insert the power tool in-
to a drill stand and mount a
water collecting ring (see
“Accessories/Spare Parts”,
page 15).
Ensure that water-carrying hoses, connectors and the
water collection ring (accessory) are in immaculate
condition. Replace damaged or worn parts before the
next use. Water escaping from parts of the power tool will
increase the risk of electric shock.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
In conjunction with diamond wet-drilling core bits and a water
supply, the power tool is intended for wet drilling in concrete
and reinforced concrete. The power tool can be combined
with an extraction device (water collection ring and wet/dry
vacuum cleaner).
In conjunction with dry diamond core bits and a suitable ex-
traction device, the machine is intended for dry drilling in
bricks, sandstone, aerated concrete and tiles.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Lock-on button for On/Off switch
3 Portable residual current device (PRCD)
4 Vacuum hose*
5 Vacuum connection*
6 Extraction adapter
7 Water connection adapter
8 Water outlet connector
9 Water cock
10 Gear selector
11 Claw coupling
12 Auxiliary handle (insulated gripping surface)
13 Handle (insulated gripping surface)
14 Core bit*
15 Drill spindle
16 Wing bolt for adjustment of auxiliary handle
17 Spirit level for horizontal alignment
18 Spirit level for vertical alignment
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Diamond Drill GDB 180 WE
Article number
3 601 A89 8..
Rated power input
W2000
Output power
W1340
Rated speed n
0
–1st gear
–2nd gear
min
-1
min
-1
900
2800
Drilling diameter
optimum in brickwork
possible in brickwork
–optimum in concrete
–possible in concrete
mm
mm
mm
mm
40180
0–180
40150
0–180
The values given are valid for a nominal voltage [U] of 230V. For differ-
ent voltages and models for specific countries, these values can vary.
OBJ_BUCH-2199-002.book Page 12 Monday, June 1, 2015 12:16 PM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GDB 180 WE Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GDB 180 WE Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info