Manual Bosch GCR 180 Professional (page 10 of 128) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

591911

Zoom out

Zoom in

1/128

10 | English

1 609 92A 0PW | (31.10.14) Bosch Power Tools

English

Safety Notes

Read all safety warnings and instruc-

tions that were provided with the drill

stand or the drill. Failure to follow the safety warnings and

the instructions may result in electric shock, fire and/or seri-

ous injury.

Save all safety warnings and instructions for future refer-

ence.

 Disconnect the plug from the power source before

making any adjustments or changing accessories.

Starting drills accidentally is the cause of some accidents.

 Assemble the drill stand properly before mounting the

drill. The correct assembly is important in order to ensure

proper function.

 Before using, fasten the drill securely to the drill

stand. An unsecured drill in the drill stand can lead to loss

of control.

 Fasten the drill stand on a firm and level surface. When

the drill stand can slip away or wobble, then the drill can-

not be guided uniformly and securely.

 Keep the connection cable of the drill away from the

working area. Damaged or entangled cables increase the

risk of an electric shock.

 Maintain the drill stand with care. Check for misalign-

ment or binding of moving parts, breakage of parts and

any other condition that may affect the function of the

drill stand. Have damaged parts repaired before using

the drill stand. Many accidents are caused by poorly main-

tained devices.

 Have your drill stand serviced/repaired only by a quali-

fied repair person using original replacement parts.

This will ensure that the safety of the device is maintained.

 The safety warnings and working instructions for the

drill as well as for the drilling tools and accessories be-

ing used are to be strictly observed!

 Do not overload the drill stand and do not use it as a lad-

der or scaffold. Overloading or standing on the drill stand

can raise the drill stand’s centre of gravity and cause it to

tip over.

 Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

 Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.

 Avoid abnormal body posture. Provide for a secure

stance and keep your balance at all times. In this man-

ner, you can control the power tool better in unexpected

situations.

 Store idle drill stands out of the reach of children and

do not allow persons unfamiliar with the device or

these instructions to operate the device. Drill stands are

dangerous in the hands of untrained users.

 Before any work on the drill stand or drill, during work

breaks and when not in use, secure the drill stand

against unintentional moving by tightening the parking

brake 13.

 The power tool may only be operated on a mains supply

with protective conductor and adequate dimensioning.

 Always fasten the drill stand using anchors or vacuum

(accessory) to prevent accidental tipping of the drill

stand with inserted diamond drill and core bit.

When wet drilling over-

head, the escaping water

must be collected. To do

this, insert the power tool

into a drill stand and mount a

water collecting ring (see

“Mounting the Water Collec-

tion Ring”, page 12).

 Ensure that water-carrying hoses, connectors and the

water collection ring (accessory) are in immaculate

condition. Replace damaged or worn parts before the

next use. Water escaping from parts of the power tool will

increase the risk of electric shock.

 Observe valid national and international standards.

Product Description and

Specifications

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the fold-out

page with the illustration of the drill stand and leave it open.

Intended Use

The drill stand for diamond drills is intended for mounting

Bosch diamond drills GDB 180 WE. Other devices may not be

used.

Using an anchor, the drill stand for diamond drills can be fas-

tened to the floor, wall and overhead.

The drill stand for diamond drills can be attached to the floor

by means of vacuum (accessory) or (with an additional safe-

guard) against the wall. Attaching overhead is not permitted.

Product Features

The numbering of the illustrated product features refers to the

representation of the drill stand on the graphics page.

1 Star handle

2 Screw for drill fixture

3 Drill fixture

4 Drilling column

5 Upper screw of drilling-angle adjustment

6 Levelling screw

7 Water collection ring*

WARNING

OBJ_BUCH-2243-001.book Page 10 Friday, October 31, 2014 12:11 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GCR 180 Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GCR 180 Professional Manual

Product: