786454
17
Zoom out
Zoom in
Previous page
1/255
Next page
English | 17
Symbols and their meaning
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear a dust mask.
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the cutting blade can lead to in-
juries.
Wear protective gloves. Cutting discs
have sharp edges and become very hot
during operation.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is a stationary machine that uses cutting
discs to cut metal materials with and against the grain, in
straight lines and at mitre angles up to 45°, without the use
of water.
Using diamond-tipped cutting discs is not permitted.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off function for on/off switch
(2) On/off switch
(3) Handle
(4) Retracting blade guard
(5) Spindle lock
(6) Cutting disc
(7) Angle guide
(8) Locking spindle
(9) Quick release
(10) Spindle handle
(11) Assembly holes
(12) Hex key (8mm)
(13) Base plate
(14) Clamping jaw
(15) Workpiece support for workpieces with cross sec-
tion of max. 40x40mm
(16) Locking screw for angle guide
(17) Transport safety lock
(18) Tool arm
(19) Transport handle
(20) Protective guard
(21) Spark guard plate
(22) Tool spindle
(23) Clamping flange
(24) Washer
(25) Hexagon screw
Technical Data
Cut-off grinder GCO 14-24 J
Article number 3601M372..
Rated power input W 2400
No-load speed min-1 3800
Soft start
Weight according to EPTA-
Procedure 01:2014 kg 18.0
Protection class / II
Permitted workpiece dimensions (maximum/minimum): Permissible
workpiece dimensions
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Dimensions of suitable cutting discs
Max. cutting disc diameter mm 355
Max. cutting disc thickness mm 3
Hole diameter mm 25.4
Noise Information
Noise emission values determined according to
EN62841-3-10.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 101dB(A); sound power level
112dB(A). Uncertainty K=3dB.
Wear hearing protection!
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
Bosch Power Tools 1 609 92A 7ND | (26.04.2022)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GCO 14-24 J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GCO 14-24 J in the language / languages: All languages as an attachment in your email.

The manual is 10.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info