786479
34
Zoom out
Zoom in
Previous page
1/475
Next page
34 | English
(53) Vertical distance stopb)
(54) Horizontal distance stopb)
(55) Length stopb)
(56) Locking screw for length stopb)
(57) Clamping screw for length gaugeb)
(58) Screws for insert plate
(59) Set screw for laser positioning (right of the saw
blade)
(60) Hex key (2.5mm)
(61) Set screw for laser positioning (left of the saw
blade)
(62) Screw for laser protection cap
(63) Fastening screw for laser mounting plate
(64) Fastening screw for laser housing
(65) Stop screw for 0° bevel angle
(66) Stop screw for left-hand bevel angle range
(67) Stop screw for right-hand bevel angle range
(68) Set screws for mitre angle scale
(69) Screw for mitre angle indicator
(70) Hook-and-loop strap
a) Not available in all country-specific versions.
b) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Sliding mitre saw GCM350-254 GCM350-254 GCM350-254 GCM350-254
Article number 3601M226.. 3601M22640 3601M22660 3601M226B0
Rated power input W 1800 1800 1450 1800
No-load speed min-1 3700–5000 3700–5000 4600 3700–4600
Starting current limitation
Laser type nm 650 650 650 650
mW <0.39 <0.39 <0.39 <0.39
Laser class 1 1 1 1
Divergence of laser line 1.0 mrad
(full angle) 1.0 mrad
(full angle) 1.0 mrad
(full angle) 1.0 mrad
(full angle)
Weight according to EPTA-
Procedure01:2014 kg 24.2 24.2 24.2 24.2
Protection class / II / II / II / II
Dimensions of suitable saw blades
Saw blade diameter mm 254 254 254 254
Base blade thickness mm 1.7–2.6 1.7–2.6 1.7–2.6 1.7–2.6
Max. cutting width mm 3.2 3.2 3.2 3.2
Hole diameter mm 30 25.4 30 25.4
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Permissible Workpiece Dimensions(see "Permissible workpiece dimensions", page39)
Noise Information
Noise emission values determined according to
EN62841-3-9.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 95dB(A); sound power level
106dB(A). Uncertainty K = 3dB.
Wear hearing protection!
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
1 609 92A 7N9 | (26.04.2022) Bosch Power Tools
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GCM 350-254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GCM 350-254 in the language / languages: All languages as an attachment in your email.

The manual is 11.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info