786479
33
Zoom out
Zoom in
Previous page
1/475
Next page
English | 33
Symbols and their meaning
3601M22640
3601M226B0
blade thickness and the saw blade hole
diameter, as well as the tool spindle dia-
meter. Wherever possible, use the redu-
cers provided with the saw blade.
The saw blade diameter must match the
information specified on the symbol.
Shows the rotational direction of the SDS
bolt for tightening the saw blade (anti-
clockwise) and for loosening the saw
blade (clockwise).
Clamping lever closed:
The adjusted bevel angle of the tool arm
is held in place.
Clamping lever open:
Bevel angles can be adjusted.
175 mm
20 mm
Direction of rotation of the spacer for the
slide device for sawing wide mouldings.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
47° (to the left) to 47° (to the right).
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Fence
(2) Adjustable fence
(3) Standard 47°, 45°, 33.9° and 22.5° bevel angle
stops
(4) Scale for bevel angle
(5) Angle indicator for right-hand bevel angle range
(6) Locking screw for slide device
(7) Clamping lever for all bevel angles
(8) Speed regulatora)
(9) Transport safety lock
(10) Transport handle
(11) Protective guard
(12) Handle
(13) Locking lever
(14) Laser protection cap
(15) Retracting blade guard
(16) Guide roller
(17) Mounting holes
(18) Saw table
(19) Insert plate
(20) Locking clamp
(21) Locking knob for various mitre angles
(22) Mitre pre-setting lever
(23) Tilt protector
(24) Angle indicator for mitre angles
(25) Detents for standard mitre angles
(26) Scale for mitre angles
(27) Saw table extension
(28) Recessed handles
(29) Holes for screw clamp
(30) SDS bolt
(31) On/off switch
(32) On/off switch for laser (cutting line indication)
(33) Laser warning label
(34) Chip ejector
(35) Locking screw for the adjustable fence
(36) Slide device
(37) Hex key(6mm/4mm)
(38) Screw clamp
(39) Depth stop adjusting screw
(40) Depth stop
(41) Angle indicator for left-hand bevel angle range
(42) Stop for standard 0° bevel angle
(43) Chip deflector
(44) Spindle lock
(45) Hex socket screw for mounting the saw blade
(46) Clamping flange
(47) Saw blade
(48) Inner clamping flange
(49) Clamping screw for saw table extension
(50) Threaded rod
(51) Wing bolt
(52) Laser beam outlet aperture
Bosch Power Tools 1 609 92A 7N9 | (26.04.2022)
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GCM 350-254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GCM 350-254 in the language / languages: All languages as an attachment in your email.

The manual is 11.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info