32107
10
Zoom out
Zoom in
Previous page
1/57
Next page
English - 3
Stepless RPM Control
(GBM 6 RE)
Light pressure on the ON-OFF
switch 5 results in low rotational
speed, thus allowing drilling to be-
gin in a smooth, controlled manner.
Further pressure on the switch results in an in-
crease in speed.
Changing Rotational Direction
(GBM 6 RE)
With the rotational direction switch 6, the rota-
tional direction of the machine can be switched.
(When the on-off switch 5 is operated, the rota-
tional direction switch 6 is locked).
Right rotation:
Press the direction of rotation switch to the left to
the stop (normal operation: drilling, impact drill-
ing, screwdriving in of screws, etc.). The rota-
tional direction is indicated by a stamped “R”.
Left rotation:
Press the rotational direction switch thought to
the right stop. (Loosening and removing of
screws and nuts).
Switch the direction of rotation only at a
standstill.
Ring Gear Chuck
Use an open-end spanner on spanner surface to
hold spindle. Place the chuck key 7 in one of the
3 bores and loosen the chuck 1 by turning it to the
left using the key as a lever.
If the chuck is frozen in place, a tap on the chuck
key should loosen it.
Keyless Chuck
Insert hexagonal tool (Allen key or screwdriver
bit) into the chuck and clamp the free end in a
vice. Position open-end spanner on key face of
drill spindle and loosen chuck in an anti-clock-
wise direction, as if loosening a screw.
Sharpening Drill Bits
Only HSS drill bits in perfect condition (HSS = high
speed steel) should be used for drilling metal. You
can be sure of obtaining the required quality by
purchasing from the range of Bosch accessories.
Twist drills from 3.5 to 10 mm can easily be
sharpened with the drill sharpener (see accesso-
ries).
Bench Stand
We recommend the use of a bench stand (see
accessories) for work where greater precision is
required.
Machine Vice
Clamp work pieces tight for drilling, i.e., using the
machine vice (see Accessories). This keeps the
work piece from turning and thus prevents result-
ing accidents
Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and the ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an authorized after-sales
service centre for Bosch power tools.
Chuck Replacement
Practical Advice
Maintenance and Cleaning
GBM 6/RE - Buch Seite 3 Donnerstag, 7. November 2002 3:54 15
10 • 2 609 140 175 • 02.11
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GBM6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBM6 in the language / languages: English, German, Dutch, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch GBM6

Bosch GBM6 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info