786455
14
Zoom out
Zoom in
Previous page
1/167
Next page
14 | Français
The machine vice, which is available as an accessory, en-
ables the workpiece to be securely clamped. This prevents
the workpiece from turning and any accidents this could
cause.
Work instructions for stirring
uDo not use the power tool in a stand.
uAvoid splashing the material. Otherwise you could slip
and lose control of the power tool.
uAvoid continuously operating the power tool at re-
duced speed. Otherwise the motor of the power tool
could overheat.
To release the lock-on button (5), briefly press the on/off
switch (6) and then let it go. This will prevent the power tool
from restarting unintentionally (risk of injury).
The stirrer paddle selected depends on the material that is
to be stirred.
For materials with low viscosity, e.g. emulsion paint, var-
nishes, adhesive, grouting compound or cement slurry, use a
stirrer paddle with a left-hand spiral. The material is moved
from the top downwards in a stirrer paddle with a left-hand
spiral. The stirrer paddle is pushed upwards. Materials with
low viscosity are mixed in a way which minimises splattering.
For materials with high viscosity, e.g. ready-mixed plaster,
concrete, cement, screed, filler or epoxy resin, use a stirrer
paddle with right-hand spiral. The material is moved from
the bottom upwards in a stirrer paddle with a right-hand
spiral. The stirrer paddle works its way into the mixture. Ma-
terials with high viscosity are mixed thoroughly.
Move the power tool up and down when working. Clean the
stirrer paddle after use.
uStore the power tool in a safe place. Ensure that it can-
not fall over. The power tool may become damaged if this
happens.
Maintenance and Service
Maintenance and Cleaning
uPull the plug out of the socket before carrying out any
work on the power tool.
uTo ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of power tools along with
household waste.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Only for United Kingdom:
According to The Waste Electrical and Electronic Equipment
Regulations 2013 (SI 2013/3113) (as amended), products
that are no longer usable must be collected separately and
disposed of in an environmentally friendly manner.
Français
Consignes de sécurité
Avertissements de sécurité généraux pour l’outil
électrique
AVERTISSE-
MENT
Lire tous les avertissements de sé-
curité, les instructions, les illustra-
tions et les spécifications fournis
avec cet outil électrique. Ne pas suivre les instructions
1 609 92A 7GL | (26.07.2022) Bosch Power Tools
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GBM 1600 RE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBM 1600 RE in the language / languages: All languages as an attachment in your email.

The manual is 4.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info