Manual Bosch gbh 36 v li compact (page 24 of 317) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

388877

Zoom out

Zoom in

1/317

24 | English

1 619 929 797 | (3.2.09) Bosch Power Tools

Changing the Tool

The dust protection cap 3 largely prevents the

entry of drilling dust into the tool holder during

operation. When inserting the tool, take care

that the dust protection cap 3 is not damaged.

f A damaged dust protection cap should be

changed immediately. We recommend hav-

ing this carried out by an after-sales serv-

ice.

Inserting SDS-plus Drilling Tools (see figure E)

The SDS-plus drill chuck allows for simple and

convenient changing of drilling tools without the

use of additional tools.

– Clean and lightly grease the shank end of the

tool.

– Insert the tool in a twisting manner into the

tool holder until it latches itself.

– Check the latching by pulling the tool.

As a requirement of the system, the SDS-plus

drilling tool can move freely. This causes a cer-

tain radial run-out at no-load, which has no ef-

fect on the accuracy of the drill hole, as the drill

bit centres itself upon drilling.

Removing SDS-plus Drilling Tools

(see figure F)

– Push back the locking sleeve 4 and remove

the tool.

Inserting Drilling Tools without SDS-plus

Note: Do not use tools without SDS-plus for

hammer drilling! Tools without SDS-plus and

their drill chucks are damaged by hammer drill-

ing.

– Insert a key type drill chuck 18 (see “Chang-

ing the Key Type Drill Chuck”, page 23).

– Open the key type drill chuck 18 by turning

until the tool can be inserted. Insert the tool.

– Insert the chuck key into the corresponding

holes of the key type drill chuck 18 and clamp

the tool uniformly.

– Set the selector switch 8 to the “Drilling”

symbol.

Removing Drilling Tools without SDS-plus

– Turn the sleeve of the key type drill chuck 18

with the drill chuck key in anticlockwise di-

rection until the drilling tool can be removed.

Dust Extraction with the Dust Extrac-

tion Attachment (Accessory)

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Mounting the Dust Extraction Attachment

(see figure G)

For dust extraction, the dust extraction attach-

ment (accessory) is required. When drilling, the

dust extraction attachment retracts so that the

attachment head is always close to the surface

at the drill hole.

– Press the button for depth stop adjustment 9

and remove the depth stop 1. Press button 9

again and insert the dust extraction attach-

ment into the auxiliary handle 16 from the

front.

– Connect an extraction hose (diameter

19 mm, accessory) to the extraction sleeve

20 of the dust extraction attachment.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

OBJ_BUCH-518-002.book Page 24 Tuesday, February 3, 2009 12:02 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gbh 36 v li compact in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gbh 36 v li compact Manual

Product: