786259
23
Zoom out
Zoom in
Previous page
1/337
Next page
English | 23
Temperature indicator(29) Meaning/cause Solution
Red Operating temperature of the battery or the
power tool has been exceeded, power tool
switches itself off as a precautionary measure
Leave the power tool to cool down or replace
overheated battery
Power tool status
indicator(27) Meaning/cause Solution
Green Status OK
Yellow Critical temperature has been reached or re-
chargeable battery is almost empty Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
Red Power tool has overheated or rechargeable
battery is empty Allow the power tool to cool down, or replace
or charge the battery
Red Lock-on button pressed in "hammer drilling"
operating mode Press the lock-on button again
Combi-switch activated during operation Turn the power tool off and on again
Motor is jammed, battery too weak Charge the battery or use the recommended
battery type
General error Turn the power tool off and on again, or re-
move the battery and reinsert it
If the error persists:
Send the power tool to the after-sales ser-
vice
Flashing red
In combination with the
rapid shut-off
indicator(24)
Rapid shut-off is triggered Turn the power tool off and on again
Flashing blue Power tool is establishing a connection to a
mobile device or settings are being trans-
ferred
Smartphone symbol(28) Meaning/cause
Further information can be found under the "Power tool status" display on a mobile device if it
is connected via Bluetooth® wireless technology.
Selecting the working mode
Working mode(25) indic-
ator Functions
lights up Auto working mode: Fast, controlled run-up up to maximum power
"Hammer drilling" operating mode (Electronic Precision Control soft start): Fast, con-
trolled run-up up to maximum power
Rapid Shut-off (KickBack Control) active
"Chiselling" operating mode (Adaptive Speed Control soft start): Fast, controlled run-up up
to maximum power
lights up Soft working mode: Reduced power for processing sensitive materials
"Hammer drilling" operating mode (Electronic Precision Control soft start): Slow, strictly
controlled run-up up to reduced, low power
Rapid shut-off (KickBack Control) with an even more sensitive setup
"Chiselling" operating mode (Adaptive Speed Control soft start): Slow, strictly controlled
run-up up to reduced power
Bosch Power Tools 1 609 92A 7SJ | (23.06.2022)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GBH 18V-34 CF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBH 18V-34 CF in the language / languages: All languages as an attachment in your email.

The manual is 7.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info