786452
15
Zoom out
Zoom in
Previous page
1/167
Next page
English | 15
are damaged, run untrue or vibrate during use. Dam-
aged abrasive tools can burst apart and cause injuries.
uProducts that are only sold in AUS and NZ: Use a resid-
ual current device (RCD) with a nominal residual current
of 30 mA or less.
Switching On and Off
To start the power tool, push the on/off switch (8) into
position "I".
To switch off the power tool, push the on/off switch (8)
into position "0".
Working Advice
uSwitch the power tool on before bringing the work-
piece into contact with it and only switch the power
tool off after you have removed the workpiece. The
workpiece can move suddenly.
uNever reach into the power tool grinding wheel when
it is running. This can lead to serious injuries.
uWear a work apron. Ensure that no persons are at risk
due to flying sparks. Remove combustible materials
from the surrounding area. Flying sparks are created
when sanding metals.
Use silicon carbide grinding discs C (accessory) when work-
ing carbide (TC) workpieces.
Place the workpiece you intend to grind onto the work-
piece support (12) and press it lightly against the grind-
ing wheel. To achieve optimal grinding results, move the
workpiece gently back and forth. This also ensures that
the grinding wheel is worn off evenly.
Cool off the workpiece in water at intervals.
Transport
Remove all accessories that cannot be securely fitted to
the power tool.
Wind up the network cable completely and tie it together.
To lift or transport the power tool, hold it from below by
the two protective guards (6). You can support the power
tool in the area of the holes for mounting (7).
uNever use the spark arrestor (11) or workpiece sup-
port (12) when transporting the power tool.
Maintenance and Service
Maintenance and Cleaning
uPull the plug out of the socket before carrying out any
work on the power tool.
uTo ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of power tools along with
household waste.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Only for United Kingdom:
According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113), power tools that are no longer
usable must be collected separately and disposed of in an
environmentally friendly manner.
Bosch Power Tools 1 609 92A 7Y3 | (02.06.2022)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GBG 60-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBG 60-20 in the language / languages: All languages as an attachment in your email.

The manual is 8.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info