786180
18
Zoom out
Zoom in
Previous page
1/221
Next page
18 | English
Changing the Battery Compartment Cover
(seefiguresA3−A5)
If you wish to use a ProCORE18V 12Ah battery, the battery
compartment cover(12) can then no longer be closed. In
this case, the battery compartment cover(12) can be re-
placed with a screen(23) designed for this purpose.
In damp or wet conditions, the dust extractor may only be
used with the battery compartment cover closed.
Removing the Battery Compartment Cover
(seefigureA3)
Remove the battery(20) from the battery bay(19).
Remove the two fastening screws(22) (ST4×12) with a
cross-headed screwdriver PH1 and take off the battery com-
partment cover(12).
Inserting the Screen (seefigureA4)
Press the battery compartment cover bracket(24) down-
wards and slide on the screen(23).
Removing the Screen (seefigureA5)
Apply a slot screwdriver, push the screen(23) a little way to-
wards the rear and remove the screen. When doing so, press
the battery compartment cover bracket(24) downwards.
Fitting the Brackets for Extractor Accessories
(seefigureB)
Slide the bracket(25) for the suction tube and crevice
nozzle firmly into the adapter(10) provided for it from
above until it clicks into place.
Slide the bracket(27) for the vacuum hose and floor
nozzle firmly into the adapter(7) provided for it from
above and tighten the fixing bolts(26).
Fitting the vacuum hose (see figure C)
Insert the vacuum hose (13) into the hose adapter (8) un-
til both snap fasteners (28) of the vacuum hose click into
place.
Note: The friction generated by the dust in the vacuum hose
and accessory during extraction causes an electrostatic
charge that the user may experience as static discharge (de-
pending on environmental factors and their physiological
state).
Fitting the Vacuuming Accessories
The vacuum hose(13) is equipped with a clip system which
can be used to connect vacuuming accessories (dust extrac-
tion adapter(14), curved nozzle(15)).
Fitting the extraction adapter or curved nozzle
(seefigureD)
Fit the extraction adapter(14) or the curved nozzle(15)
to the vacuum hose(13) until the two snap
fasteners(28) on the vacuum hose audibly click into
place.
To remove the adapter, press the snap fasteners(28) in-
wards and pull apart the components.
Fitting the Nozzles and Tubes
If required, place the suction tubes (18) firmly inside one
another and then attach them firmly to the curved nozzle
(15).
Attach the floor nozzle (17) or the crevice nozzle (16)
firmly to the suction tube (18) or the curved nozzle (15).
Attaching the carrying strap (seefigureE)
uThe carrying strap is only intended for carrying and at-
taching the dust extractor and not as a safety harness.
Click the snap hooks of the carrying strap(29) into the
fastening eyes(9) of the dust extractor.
Fitting the Rollers (seefigureF)
Insert the 4 fastening pins on the rollers(30) into the roller
adapters(31) until they audibly click into place.
Other rollers can also be used as per the EN12529 standard
(11mm fastening pin diameter).
uCheck the functionality of the roller brakes before us-
ing the dust extractor.
Operation
uRemove the battery before cleaning or performing
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
uEnsure that the work area is clean and tidy to minim-
ise the risk of tripping.
Starting Operation
uThe dust extractor must not be used without a filter.
uDo not use damaged filters (e.g. no cracks, small
holes, etc.). Replace any damaged filters immedi-
ately.
uBefore extraction, ensure that the filter unit is se-
curely fitted.
uBefore extraction, ensure that the battery compart-
ment cover is securely closed.
uPlease inform yourself about the applicable regula-
tions/laws on how to handle harmful types of dust in
your country.
uOnly vacuum rock dust with the power tool and dust
extraction system combination explicitly identified,
for which it has been proven that the legal thresholds
are not exceeded. You can find this evidence at
http://www.bosch-professional.com/dust.
The dust extractor must categorically not be used in poten-
tially explosive areas.
To ensure optimum suction power, you must always fully un-
wind the vacuum hose(13) from the vacuum hose
bracket(27).
1 609 92A 7MV | (12.05.2022) Bosch Power Tools
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GAS 18V-10 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GAS 18V-10 L in the language / languages: All languages as an attachment in your email.

The manual is 6.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info