634127
9
Zoom out
Zoom in
Previous page
1/106
Next page
English | 9
Bosch Power Tools 1 609 92A 2KX | (14.3.16)
Flashing Error Indicator (red) 4
The flashing light of the red error indicator 4 sig-
nals a different fault of the charger, see section
“Troubleshooting Causes and Corrective Mea-
sures”.
Working Advice
The charger is combined with a voltage transformer 9 which
converts the 12 V on-board voltage into a 290 V voltage.
When doing so, the voltage transformer 9 monitors the bat-
tery voltage in the vehicle. It is designed to switch the charger
on only when the engine is running or at an on-board voltage
> 13 V (+/- 0.3 V). If the engine is switched off or at an on-
board voltage < 13 V (+/- 0.3 V), the charger will switch itself
off automatically after a follow-up time of 3 minutes.
As the charger also draws power from the starter battery
when no battery is being charged (idling), it should be discon-
nected from the power supply when not being used for pro-
longed periods of time.
With continuous or several repetitive charging cycles without
interruption, the charger can warm up. This is not meaningful
and does not indicate a technical defect of the battery charg-
er.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Troubleshooting Causes and Corrective Mea-
sures
Maintenance and Service
If the battery charger should fail despite the care taken in
manufacturing and testing procedures, repair should be car-
ried out by an authorised after-sales service agent for Bosch
power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the charging unit or voltage transformer.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Cause Corrective Measure
Red error indicator 4 flashes
No charging procedure possible
The battery is not positioned
(correctly)
Position the battery centrally
with the battery base on the
charging platform 5
Detection of foreign object
An object other than / in addi-
tion to the battery is on the
charging platform 5
Remove object
Wrong battery positioned Position a compatible battery
Battery pack defective Replace the battery
Standby indicator (green) 2 does not illuminate
On-board voltage too low Start engine (charge starter
battery).
12 V plug of the charger 6 is
not plugged in (correctly)
Plug the 12 V plug 6 into the
socket (completely).
Cord socket 11 and cord plug
10 not (correctly) connected
Connect cord socket 11 and
cord plug 10.
Socket outlet, mains cable or
battery charger defective
Check on-board voltage, have
charger checked if necessary
by an authorised after-sales
service centre for Bosch
power tools.
Voltage transformer 9 is too
warm
Wait until the voltage trans-
former has cooled down.
OBJ_BUCH-2512-002.book Page 9 Monday, March 14, 2016 11:29 AM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GAL 1830 W-DC Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GAL 1830 W-DC Professional in the language / languages: All languages as an attachment in your email.

The manual is 13,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info