458024
51
Zoom out
Zoom in
Previous page
1/76
Next page
6 720 645 349 (2010/09)
Menu settings INSTALLER SETTINGS (contractors only) | 51
Menu: Heating parameters > Calibrate room
temp sensor on FB10
Calibrate room temp sensor on FB10 only
appears if a remote control FB 10 is assigned.
Use this menu if you want to correct the
displayed room temperature.
B Position a precision instrument near FB 10.
The precision instrument must not transfer
any heat to the FB 10.
B Keep away from heat sources such as sunlight,
body heat, etc. for 1 hour.
B Adjust the displayed room temperature
correction value.
Menu: Heating parameters > Mixer running time
B Set the Mixer running time to the runtime of
the fitted mixer servomotor.
Menu: Heating parameters > Minimum outside
temperature
B Set the minimum outside design temperature
for the heating system (standard value
Æ table 9).
A low outside temperature results in a flat
heating curve.
Menu: Heating parameters > Building storage
capacity
B Set the factor for the thermal storage capacity
of the building.
50 %: Building of solid construction
(e.g. well insulated brick house).
50 %: Building of light construction
(e.g. wood or steel frame structure).
Menu: Heating parameters > Calibrate internal
room temp sensor
Calibrate internal room temp sensor only
appears if the controller is wall mounted.
Use this menu if you want to correct the
displayed room temperature.
B Position a precision instrument near FW 100.
The precision instrument must not transfer
any heat to the FW 100.
B Keep away from heat sources such as sunlight,
body heat, etc. for 1 hour.
B Adjust the displayed room temperature
correction value.
8.4 Configuring the solar thermal
system
Installer settings: Solar system config
For menu structure and setting ranges
Æ page 44.
Use this menu if you want to set the thermal
disinfection function for the solar thermal
system.
B In addition to the 1. Standard system set
option Solar sys option E Thermal
disinfection.
The pump (PE) is switched via menu Thermal
disinfection (Æ chapter 6.4.6 on page 37),
and the entire cylinder volume is heated to the
required thermal disinfection temperature.
Location
Minimum outside temperature
in °C
Brisbane 4
Canton 15
Chongqing 3
Hong Kong 6
Melbourne 0
Shanghai -1
Sydney 5
Tab. 9 Minimum outside temperatures for China
and Australia
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch FW 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch FW 100 in the language / languages: English as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch FW 100

Bosch FW 100 User Manual - English - 40 pages

Bosch FW 100 Usermanual and installation guide - German - 76 pages

Bosch FW 100 Quick start guide - German - 2 pages

Bosch FW 100 Quick start guide - Dutch - 2 pages

Bosch FW 100 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info