458024
47
Zoom out
Zoom in
Previous page
1/76
Next page
6 720 645 349 (2010/09)
Menu settings INSTALLER SETTINGS (contractors only) | 47
8.2 Configuring the heating system
Installer settings: System configuration
For menu structure and setting ranges
Æ page 43.
Use this menu if you want to configure the system
automatically or manually. For example, during
commissioning or when altering the system.
B Set DIP switch at IPM 1 to 1.
B Switch ON the system.
B Set FB 10 or FB 100 to 1.
B Start automatic configuration.
B Check the other menu points under System
configuration and, if necessary, adjust
manually to suit the current system.
8.3 Parameters for heating
Installer settings: Heating parameters
For menu structure and setting ranges Æ page 44.
Use this menu if you want to adjust the
parameters for the heating system. For example,
the heating curve can be calculated with these
parameters.
Menu: Heating parameters > Heating circuit
type
B Selecting the heating type:
Foot point/End point: Default settings for
a level heating curve are used according to
the classic base point/end point method.
Underfloor heating: Default settings for an
uneven heating curve as in an underfloor
heating circuit are used.
Radiators: Default settings for an uneven
heating curve as in a radiator heating
circuit are used.
Convectors: Default settings for an uneven
heating curve as in a convector heating
circuit are used.
For system examples, see the IPM
manual. For further systems, see
the technical guides.
Set the flow temperature controller
on the heating appliance to the
maximum required flow
temperature.
Parameters not used in a particular
type of heating system are not
shown.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch FW 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch FW 100 in the language / languages: English as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch FW 100

Bosch FW 100 User Manual - English - 40 pages

Bosch FW 100 Usermanual and installation guide - German - 76 pages

Bosch FW 100 Quick start guide - German - 2 pages

Bosch FW 100 Quick start guide - Dutch - 2 pages

Bosch FW 100 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info