462319
10
Zoom out
Zoom in
Previous page
1/33
Next page
10
1.2 Headlight aiming device on floor rails EFLE 52 and
EFLE 62
The standing surface for the vehicle and the guide
rails of the apparatus must be horizontal and parallel
to one aonther. In order to achieve the prescribed
measuring exactness, the horizontal deviation of the
guide rails must not be more than 1.3 mm out of line
with respect to one another.
Fig. 3
1 Roatary knob for aligning the test device with the longitudinal
axis of the vehicle.
2. Prerequisites for aiming the headlamps
2.1 Operating site
The operating site must meet the conditions specified in Sections
1.1 and 1.2 above.
2.2 Tire-inflation pressure
All tires must be inflated to the pressure specified for the particular
vehicle.
2.3 Headlamps
Deflective lenses and reflectors, as well as blackened bulbs must
be replaced before the aiming adjustment.
With headlamps that are fitted with an adjusting device, observe
the following:
In order to aim headlamps on vehicles fitted with a device for
infinitely variable adjustment of the headlamps by hand, the adju-
sting device must be in the specified detent position.
When the headlamps are fitted with an adjusting device that can
be set to only 2 detent positions, proceed as follows:
With vehicles in which the headlamp beams are directed
upward as the load increases (loading space at the black), the
headlamps should be aimed with the adjusting device in the
"high" lightbeam detent position.
With vehicles in which the headlamp beams are directed
downward as the load increases (loading space at the front),
the headlamps should be aimed with the adjusting device in
the "low" light-beam detent position.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch EFLE60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EFLE60 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info