Manual Bosch EFLE51 (page 11 of 33) (English, German, French, Spanish)

462317

Zoom out

Zoom in

1/33

2.4 Setting up aiming device

The distance between the aiming device and the headlamp should

be just enough so that setting operations can also be carried out

on the headlamp from in front (about 30 cm).

The center of the lens on the aiming device should differ by less

than 3 cm from the headlamp center. The center of the lens is

identified by marks (see Fig. 2, No. 5).

In order to adjust the height of the aiming device, the hand roller ist

turned (1) and a brake is released. The brake automatically looks

in place again when the roller is released.

Fig. 4

1 control knob for height adjustment

2 rotary knob for setting the inclination measure

2.5 Aligning the aiming device with the longitudinal axis

of the vehicle

2.5.1 Vehicles with flat engine-compartment lid

By swinging the mirror arm (Fig. 1, Pos. 2) the alignment mirror

(Fig. 2, Pos. 1) is set above the head towards the operator so that

the front of the vehicle with two outer symmetrical reference

points (for example, the upper edge of the headlamps, joints in the

engine hood, etc.) are visible in it.

The aiming device is aligned on the longitudinal axis of the vehicle

so that the positioning line on the mirror touches these two outer

reference points equally (see Fig. 5).

With the mobile aiming devices (EFLE 50, 51, 60 and 61), this is

done by moving the aiming device using the wheeling handle.

The floor-rail aiming device (EFLE 52 and 62) is turned as required

with the rotary knob at the top of the support column (Fig. 3, No. 1).

Fig. 5

2.5.2 Cab-over-engine vehicles

In vehicles with vertical front section the centres of the headlights

are marked with chalk on the floor using a plumb bob. The centres

can be connected with a rail. These markings are lined up in the

adjusting mirror.

Fig. 6

2.6 Adjusting the aiming device

The setting used for aiming headlamps is the inclination value in cm

which the cut-off must have at a distance of 10 m.

This setting is given in Section 3.1, and is made before the test at

the rotary knob (Fig. 4, No. 2).

The vehicle should be loaded as specified.

3. Aiming regulations

Please observe the aiming regulations valid in your country.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EFLE51 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch EFLE51 Manual

Product: