462317
9
Zoom out
Zoom in
Previous page
1/33
Next page
9
ENGLISH
Instructions for putting into operation
Before the headlight aiming device is put into initial operation the
alignment mirror and the handle on EFLE 50, 51, 60 and 61 must
be turned to the working position.
Operations required to do this
Release the locking screw (1) on the equipment support
column using a 4 mm hexagon-socket screw key.
Swing the arm holding the alignment mirror 180° upward (2).
Tighten the locking screw again.
Fig. 1
Operations required to do this
Release the locking screw (1) on the equipment support
column using a 5 mm hexagon-socket screw key.
Swing the handle 90° outwards.
Insert the locking screw in the hole and tighten.
Fig. 1a
1. General
Headlamps on motor vehicles must not blind the drivers of vehicles
coming from the opposite direction. The inclination and the aiming
of the headlamp light beam to the side must therefore be adjusted
according to legal specifications.
In order to make these legally specified adjustments of motor-
vehicle headlamps, Bosch supplies the following aiming devices:
1.1 Mobile headlight aiming devices
EFLE 50, EFLE 51, EFLE 60 and 61
The surface on which the headlight aiming device is
set up must be even but it does not have to be
horizontal.
In order to achieve the specified measurement accu-
racy, surface irregularities within the area where the
aiming device is used must be less than 1.2 mm.
Fig. 2
1 alignment mirror
2 handle
3 luxmeter
4 deflection mirror
5 markings for lens center
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch EFLE51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EFLE51 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info