Manual Bosch EasyPrune (page 14 of 241) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

766863

Zoom out

Zoom in

1/241

14 | English

Charger

Article number

EU 2 609 120 713 1 600 A00 3RK

UK 2 609 120 718 1 600 A00 48V

AUS 2 609 120 717 1 600 A00 48U

JP 2 609 120 715 1 600 A00 48T

KO 2 609 120 716 1 600 A00 JL5

Rated voltage V 5.0 5.0

Charging current A 1.0 0.5

Charging period (battery dis-

charged) h 3.5 3.5

Weight according to EPTA‑Proced-

ure 01:2014 kg 0.06 0.06

Protection class / II / II

Noise/Vibration Information

Measured sound values determined according to

EN62841-1.

Typically the A‑weighted sound pressure level of the product

is lower than 70dB(A).

Overall vibrational values ah vector sum of three directions)

and uncertainty K determined according EN62841-1: ah =

2.5 m/s2, K = 1.5 m/s2.

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Starting Operation

uUse only the chargers listed in the technical data. Only

these battery chargers are matched to the lithium-ion bat-

tery of your product.

Battery Charging (see figure A)

Note: The battery is supplied partially charged. To ensure

full capacity of the battery, completely charge the battery

before using your tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging procedure

does not cause damage to the battery.

The Lithium-Ion battery is protected against deep dischar-

ging. When the battery is discharged, the tool stops the

power-assisted cutting and works in manual mode at all cut-

ting diameters.

The battery needs to be recharged when the battery charge-

control indicator (7) briefly flashes red during a cut.

The charge procedure begins as soon as the mains plug of

the battery charger is plugged into the socket outlet and the

charge Micro USB connector (9) is plugged into Micro USB

socket (5) at the handle top.

The Micro USB socket (5) can only be accessed when the

safety lock (6) is locked.

The battery charge-control indicator (7) indicates the char-

ging progress. The indicator slowly flashes green during

charge process. When the battery charge-control indicator

lights up green continuously, the battery is fully charged.

During the charging procedure, the handle of the machine

warms up. This is normal.

Disconnect the battery charger from the mains supply when

charging process ends.

uProtect the charger from moisture.

Observe the notes for disposal.

Battery charge-control indicator

The battery charge-control indicator (7) indicates the charge

condition of the battery while in operation.

LED Capacity

Continuous lighting, green ≥35%

Flashing light, green 5 − 35%

F 016 L94 019 | (04.03.2020) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyPrune in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 4,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch EasyPrune Manual

Product: