Manual Bosch EasyImpact 360 (page 12 of 77) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian)

766873

Zoom out

Zoom in

1/77

12 | English

(12) Universal bit holdera) a) Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

Technical Data

Impact drill EasyImpact 600 EasyImpact 630 | 6300

Article number 3 603 A33 0.. 3 603 A33 1..

Rated power input W 600 630

Max. power output W 300 300

No-load speed min-1 0–3000 0–3000

Impact rate min-1 0–45,000 0–48,000

Rated torque Nm 1.4 1.4

Spindle collar diameter mm 43 43

Max. drilling diameter

– Concrete mm 12 13

– Steel mm 10 10

– Wood mm 25 25

Clockwise/anticlockwise rotation ● ●

Chuck capacity mm 2–13 2–13

Weight according to

EPTA-Procedure 01:2014 kg 1.7 1.7

Protection class / II / II

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/vibration information

Noise emission values determined according to

EN62841-2-1.

Typically, the A-weighted noise level of the power tool is:

Sound pressure level 91dB(A); sound power level

102dB(A). Uncertainty K=5dB.

Wear hearing protection!

Vibration total values ah (triax vector sum) and uncertainty K

determined according toEN62841-2-1:

Drilling into metal: ah=3m/s2, K=1.5m/s2,

Impact drilling into concrete: ah=16.5m/s2, K=1.5m/s2.

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Assembly

uPull the plug out of the socket before carrying out any

work on the power tool.

Auxiliary handle (see figure A)

uDo not operate your power tool without the auxiliary

handle (8).

You can adjust the auxiliary handle (8) to any of 12 positions

in order to achieve a safe work posture that minimises fa-

tigue.

Turn the lower gripping end of the auxiliary handle (8) in ro-

tational direction  and push the auxiliary handle (8) for-

ward until you can swivel it into the required position. Then

pull the auxiliary handle (8) back again and turn the lower

gripping end in rotational direction  to tighten it.

Setting the Drilling Depth (see figure A)

You can use the depth stop (9) to set the required drilling

depthX.

Turn the lower gripping end of the auxiliary handle (8) anti-

clockwise and set the depth stop (9).

Pull the depth stop(9) far enough out that the distance

between the drill bit tip and the edge of the depth stop(9)

corresponds to the required drilling depth X.

1 609 92A 5Y4 | (26.11.2020) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyImpact 360 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 3,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch EasyImpact 360 Manual

Product: