776840
14
Zoom out
Zoom in
Previous page
1/64
Next page
14 | English
The trimmer is equipped with a semi-automatic feeding sys-
tem. The system feeds 10mm of the line with every press of
the on/off switch (4).
Manual Line Feeding
Press the line-feed button (15), and pull the cutting line out
to the desired length.
Troubleshooting
d.c.
Lawn Trimmer/Lawn Edge Trimmer
Problem Possible Cause Corrective Action
Motor refuses to start Battery discharged Recharge battery
Battery too hot/cold Allow to cool/warm
Garden tool functions
intermittently On/Off switch defective Contact Bosch customer service agent
Internal wiring of garden tool defective Contact Bosch customer service agent
Garden product la-
bours Grass too high Cut in stages
Garden tool does not
cut Cutting line too short/broken off Manually feed cutting line
Spool empty Replace line spool
Cutting line can no
longer be fed Line inside the spool entangled Inspect the spool, rewind if necessary
Spool empty Refill line spool
Cutting line retracts
into spool Cutting line too short/broken off Remove spool – rethread line (see figures JL)
Cutting line breaks fre-
quently Line inside the spool entangled Remove spool – rewind line (see figures JL)
Trimmer used incorrectly Only trim with the tip of the line, avoid stones,
walls and other hard objects. Feed the line regu-
larly to maintain full cutting diameter.
Heavy vibrations Cutting line broken
Cutting system damaged
Grass between spool housing and line-feed but-
ton
Grass in hole for line feed
Pull out cutting line with manual feed (see figure
M)
Contact Bosch customer service agent
Disassemble spool cover and remove grass
Remove grass from hole for line feed
Battery and charger
Problem Possible Cause Corrective Action
Flashing red battery
charge indicator
No charging procedure
possible
Battery not (properly) inserted Properly insert battery in charger
Battery contacts contaminated Clean the battery contacts (e. g. by inserting and
removing the battery several times) or replace
the battery
Battery defective Replace the battery
Battery charge indicat-
ors do not light up Mains plug of battery charger not plugged in
(properly) Insert mains plug (fully) into the socket outlet
Socket outlet, mains cable or battery charger de-
fective Check the mains voltage; have the battery char-
ger checked by an authorised after-sales service
agent for Bosch power tools
F 016 L94 031 | (04.06.2020) Bosch Power Tools
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch EasyGrassCut 18V 26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyGrassCut 18V 26 in the language / languages: English as an attachment in your email.

The manual is 6.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch EasyGrassCut 18V 26

Bosch EasyGrassCut 18V 26 User Manual - All languages - 295 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info