776840
12
Zoom out
Zoom in
Previous page
1/64
Next page
12 | English
3 600 HC1 A.. 3 600 HC1 C..
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 50636-2-91
Vibration emission value ahm/s2< 2.5 < 2.5
Uncertainty K m/s2= 1.5 = 1.5
Mounting and Operation
Action Figure Page
Product features A46
Delivery scope B47
Removing the transport safety C47
Connecting the shaft D48
Adjusting the handle E48
Mounting the protection guard F49
Battery charging and inserting G50
Switching On and Off H50
Switching from lawn trimming/
edge cutting I51
Removing the line spool J52
Winding line on spool K52
Mounting the line spool L53
Line feeding M53
Maintenance, Cleaning and Stor-
age N54
Accessories O55
Assembly
uCaution: Switch the garden tool off and pull the mains
plug before performing any maintenance.
Connect shaft (see figures C and D)
Note: A connected shaft can no longer be dismounted.
Remove the transport safety (9).
Connect the individual parts of the shaft until they can be
heard to engage.
Mounting and adjusting the handle (see figure E)
The handle (1) can be set to different positions. To change
the adjustment, press buttons (7) and move the handle to
the desired position. Release the buttons (7) again so that
the handle can engage.
Mounting the protection guard (see figure F)
Before mounting the protective guard, pull the plant-protec-
tion frame from the delivery position to the storage position.
Position the protection guard (8) on the trimmer head and
fasten it with the provided screw.
Do not disassemble guard once connected.
Then, pull the plant-protection frame to the working posi-
tion.
Switching on
uCaution: Switch garden tool off and remove battery
from machine before adjusting or cleaning.
uThe cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching on again.
uDo not briefly switch off and on again several times in
a row.
uOnly use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
Charging the Battery
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 35 °C. In this manner, a high battery service life is
achieved.
Note: The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not cause damage to the battery.
The “Electronic Cell Protection (ECP)” protects the lithium-
ion battery against deep discharging. When the battery is
empty, the product is switched off by means of a protective
circuit: The product no longer operates.
Do not continue to press the On/Off switch after an auto-
matic shut-off of the product. The battery could become
damaged.
Observe the notes for disposal of the battery.
Inserting/Removing the Battery (see figure G)
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
Insert the charged battery (6). Ensure the battery is inserted
correctly.
To remove the battery (6) from the machine, press the bat-
tery unlocking button (5) and pull the battery out.
Charging Procedure
The charging procedure starts as soon as the mains plug of
the charger is plugged into a socket outlet and the battery
(6) is inserted onto the charger (10).
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery
is charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
F 016 L94 031 | (04.06.2020) Bosch Power Tools
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch EasyGrassCut 18V 26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyGrassCut 18V 26 in the language / languages: English as an attachment in your email.

The manual is 6.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch EasyGrassCut 18V 26

Bosch EasyGrassCut 18V 26 User Manual - All languages - 295 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info