708029
13
Zoom out
Zoom in
Previous page
1/187
Next page
English | 13
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Keyless chuck
(2)
Front sleeve
(3)
Rear sleeve
(4)
Torque presetting ring
(5)
Gear selector switch
(6)
Clockwise rotational direction indicator
(7)
Anti-clockwise rotational direction indicator
(8)
Battery release button
A)
(9)
Battery
A)
(10)
Rotational direction switch
(11)
On/off switch
(12)
"PowerLight"
(13)
Handle (insulated gripping surface)
(14)
Screwdriver bit
A)
(15)
Universal bit holder
A)
(16)
Securing screw for keyless chuck
(17)
Hex key
B)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
B)
Commercially available (not included in the scope of deliv-
ery)
Technical Data
Cordless drill/driver EasyDrill 1200
Article number
3603JA2 1..
Rated voltage V= 12
No-load speed
1st gear min
-1
0–450
2nd gear min
-1
0–1 650
Max. torque, hard/soft
screwdriving application ac-
cording to ISO 5393
A)
Nm 20/11
Max. drilling diameter
Cordless drill/driver EasyDrill 1200
Steel mm 6
Wood mm 20
Max. screw diameter mm 6
Chuck capacity mm 0.8–10
Drill spindle thread 3/8"
Weight according to
EPTA-Procedure 01:2014
kg 1.0
Recommended ambient tem-
perature during charging
°C 0 to +35
Permitted ambient temperat-
ure during operation
B)
and
during storage
°C -20 to +50
Recommended batteries PBA 12V...
Recommended chargers AL 11..CV
GAL 1110 CV
GAL 12...
A) Depends on battery in use
B) Limited performance at temperatures <0°C
Noise/vibration information
Noise emission values determined according to
EN62841-2-1.
Typically, the A-weighted sound pressure level of the power
tool is 71 dB(A). Uncertainty K=3dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN62841-2-1:
Drilling in metal: a
h
< 2.5 m/s
2
, K = 1.5 m/s
2
Screwdriving: a
h
< 2.5 m/s
2
, K = 1.5 m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Bosch Power Tools 1 609 92A 4Y7 | (25.09.2019)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch EasyDrill 1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyDrill 1200 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info