697141
5
Zoom out
Zoom in
Previous page
1/12
Next page
Commissioning
EasyControl – 6720818479 (2017/10)
5
4.5 Installing (deinstalling) the controller
Fig. 7 Installing (deinstalling) the controller
Installing
Hook the EasyControl behind the plinth [1].
Press the EasyControl with the underside against the plinth, until an
audible “click ”is heard [2].
The EasyControl is now locked.
Deinstalling
Unlock the EasyControl by pressing the unlocking key [3].
Slightly lift the underside of the EasyControl and remove it [4].
5 Commissioning
5.1 Powering up EasyControl
Remove the protective film from the EasyControl.
Plug the mains plug of the heat source into the socket.
Switch on the gas floor-standing boiler.
This also causes the EasyControl to be supplied with mains voltage, and
it searches for a connection to:
The heat source [1],
A Wi-Fi network [2],
The Bosch server [3].
Fig. 8 Start screen
[1] Connection with the heat source
[2] Connection with Wi-Fi network
[3] Connection with Bosch server
[4] Software version (example)
[5] Connection made (example)
[6] Connection not made (example)
A green check mark [5] shows, that the connection is made. A red cross
[6] shows, that the connection is not made. See section 8.4, page 8
for an overview of possible causes and solutions.
5.2 Software update
The software version of this document is 01.xx.xx. The installed
software version is shown in the start screen [4]. Software updates are
performed automatically. It is possible that, when delivered, the
EasyControl does not yet have the current software version and does not
therefore support all the functions in the app. The update may take a few
days.
After an update has been performed, the arrangement of the touch
screen may differ from this document. See the latest version of this
document on the EasyControl site for Bosch.
1)
5.3 Operation of the touch screen
It is possible to change the settings by means of a horizontal or vertical
wiping movement (swipe) or by pressing (tap). Only operate the touch
screen with your hand.
Fig. 9 Swipe or tap
5.4 Connecting with Wi-Fi network
After the EasyControl has been connected to the heat source, it
automatically searches for Wi-Fi networks [2] and displays these on the
touch screen. While the search is being performed, a flashing Wi-Fi
symbol appears on the touch screen.
Fig. 10 Available Wi-Fi networks
[1] Cancel key
[2] Available Wi-Fi networks
Swipe vertically to find the Wi-Fi network.
Select the desired Wi-Fi network by tapping.
If the Wi-Fi network is secured with a password:
Enter the Wi-Fi network password ( section 5.5).
6720818478-5.1TD
1.
1.
2.
3.
4.
6720818478-42.1TD
01.00.00
1
2
3
4
5
6
1) See the back of this document for the web address.
EasyControl can only make a connection to “visible”
networks. If EasyControl is to establish a connection with
a “hidden network”, this must first be made “visible”.
After a connection has been established, the network can
be “hidden” again.
6720818478-15.1TD
6720818478-43.1TD
Home 3
Network 8
Wifi 7
Wifi 8
1
2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch EasyControl CT200B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyControl CT200B in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch EasyControl CT200B

Bosch EasyControl CT200B Usermanual and installation guide - German - 13 pages

Bosch EasyControl CT200B Usermanual and installation guide - Dutch - 13 pages

Bosch EasyControl CT200B Usermanual and installation guide - French - 10 pages

Bosch EasyControl CT200B Quick start guide - All languages - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info