697141
4
Zoom out
Zoom in
Previous page
1/12
Next page
EasyControl – 6720818479 (2017/10)
4
Installation
4.2 Determining the installation location
Install the controller on an internal wall in the reference room.
Ensure that there is sufficient clearance around the controller.
Fig. 3 Installation location for controller, clearance
Fig. 4 Installation location for controller, temperature
4.3 Fitting the plinth
This plinth can be fastened directly to the wall, for example at the
location of the previous controller.
Pull the mains plug of the heat source from the socket.
Connect the connecting lead (BUS connection of the heat source) to
the terminals on the plinth. The wires can be connected in any
sequence.
Fig. 5 Connecting the plinth
4.4 Connecting to the heat source
Fig. 6 Connecting the EasyControl adaptor
There are various possibilities for connection to a heat source:
Replacing an existing controller of the 100 to 400 series on the same
plinth. EasyControl is ready for operation.
•Bosch
1)
Heat source with a visible orange controller connection on
the underside: Connect the EasyControl at the orange terminal of the
orange connection for the controller.
•Bosch
1)
heat source without a visible connection for the controller.
The heat source must be opened by a recognized installer.
Heat sources, which use iRT, OpenTherm or On-Off, can only be
connected with an EasyControl adaptor (accessories), (see the back
of this document for the web address and select “Is EasyControl
suitable for me”), or consult a recognized installer.
A reference room is a room (for example the living room),
where the temperature, which is representative of the
whole dwelling, is measured, and where most time is
spent.
If weather-compensated control is used, it is not
necessary to locate the controller in the reference room.
When replacing a controller of the 100 to 400 series with
EasyControl, the existing plinth can continue to be used
( section 4.5).
When fitting to a recessed wall box, ensure that the room
temperature measurement can not be impaired by any
draughts. If required, stuff the recessed wall box with
thermal insulation material.
6720818478-2.1TD
1 m
1,2 - 1,9 m
0,75 m
0,6 m
6720818478-3.1TD
0,6 m
1 m
0,4 m
The installation instructions for the heat source contain
further information about the connection of EasyControl.
1) Or a Bosch Group brand (Nefit, Junkers, Worcester, ELM LeBlanc).
6720818478-4.1TD
EMS
l 100 m
EMS BUS
(15 V )
DC
6720818478-55.1TD
iRT
OpenTherm
On-Off
EasyControl
Adapter
l 100 m
l 3 m
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch EasyControl CT200B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyControl CT200B in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch EasyControl CT200B

Bosch EasyControl CT200B Usermanual and installation guide - German - 13 pages

Bosch EasyControl CT200B Usermanual and installation guide - Dutch - 13 pages

Bosch EasyControl CT200B Usermanual and installation guide - French - 10 pages

Bosch EasyControl CT200B Quick start guide - All languages - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info