746513
22
Zoom out
Zoom in
Previous page
1/28
Next page
en Installation
22
5. Move the appliance and lower it further so that the
collar nuts are positioned on the edge of the guide
sleeves.
6. Carefully tighten diagonally opposite nuts until the
appliance is flush-mounted on the ceiling.
Note: Tighten the nuts one at a time so that the
appliance is not wedged in the cut-out.
Connecting the appliance
Ensure that there is sufficient fuse protection for the
household wiring. The voltage and frequency of the
appliance must match the electrical wiring
(see rating plate).
The appliance corresponds to protection class 1 and
must only be operated with a protective earth
connection.
The appliance must be disconnected from the power
supply whenever installation work is being carried out.
When the appliance is installed, protection against
contact must be provided.
Only a licensed professional may connect the
appliance. They are subject to the requirements of the
local electricity provider.
:Warning – Risk of electric shock!
It must always be possible to disconnect the appliance
from the power supply. If there is a fixed connection, an
all-pole isolating switch with a contact gap of at least
3 mm must be provided for the wiring. Only an
electrician may install the fixed connection.We
recommend installing a residual-current circuit breaker
(RCCB) in the appliance's power supply circuit.
Note: To find out the correct fuse rating, see the total
connected load (in watts) on the appliance's rating
plate.
1. Guide the on-site cable carefully through the opening
in the appliance.
Notes
The bending radius of the on-site cable for
connecting the appliance must be complied with.
The cable must remain doubly insulated. Strip it
as little as possible in front of the connecting
terminal.
2. Plug the on-site cable into the connecting terminal.
1
2

/1
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch DRR16AQ20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DRR16AQ20 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch DRR16AQ20

Bosch DRR16AQ20 User Manual - German - 28 pages

Bosch DRR16AQ20 User Manual - Dutch - 28 pages

Bosch DRR16AQ20 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info