746513
20
Zoom out
Zoom in
Previous page
1/28
Next page
en Installation
20
5Installation
Install ation
Preparing for installation
The cooking vapours are more difficult to draw in the
further away they are from the hob. We recommend
a distance of at least 700 mm and a maximum of
1500 mm.
So that cooking vapours are optimally drawn in,
install the extractor hood in the middle of the hob.
The installation site must be easily accessible, so
that the appliance can be accessed freely for
servicing.
Checking the ceiling
The ceiling must be flat, horizontal and adequately
load-bearing.
The depth of the bore holes must be the same
length as the screws.
The enclosed screws are suitable only for concrete
ceilings.
The max. weight of the appliance is 40 kg.
Notes
When fixing the appliance in place, a suitable
substructure is required that is securely fastened to
the concrete ceiling.
Do not fit the appliance directly onto plasterboard
(or similar lightweight materials) in a suspended
ceiling.
To ensure correct installation, you must use a
material which is sufficiently stable and suitable for
both the structural conditions and the weight of the
appliance.
Preparing the ceiling
1. Cover the hob to protect it from damage.
2. Determine the position of the frame. In doing so,
determine where the middle should be based on the
hob.
3. Measure and mark the positions of the fastening
screws.
4. Drill four holes with a diameter of 6 mm for the fixing.
Caution!
Ensure that there are no electrical wires, gas pipes
or water pipes in the area where holes are to be
drilled.
5. Screw the fastening screws into the ceiling.
6. Screw in the threaded rods.
7. Screw the nuts approx. 1 cm onto the threaded rods.


1


PP
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch DRR16AQ20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DRR16AQ20 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch DRR16AQ20

Bosch DRR16AQ20 User Manual - German - 28 pages

Bosch DRR16AQ20 User Manual - Dutch - 28 pages

Bosch DRR16AQ20 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info