Manual Bosch DLE 40 (page 19 of 268) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

97279

Zoom out

Zoom in

1/268

English | 19

Bosch Power Tools 2 609 140 582 | (29.7.08)

Area Measurement

For area measurements, push button 4. The

indicator for area measurement appears in the

display .

Afterwards, measure the length and the width,

one after another, in the same manner as a

length measurement. The laser beam remains

switched on between both measurements.

After taking the second

measurement, the area/

surface is automatically

calculated and displayed.

The last individual meas-

ured value is indicated at

the bottom in the display,

while the final result is

shown at the top.

Volume Measurement

For volume measurements, push button 10. The

indicator for volume measurement appears in

the display .

Afterwards, measure the length, width and the

height, one after another, in the same manner as

for a length measurement. The laser beam re-

mains switched on between all three measure-

ments.

After taking the third meas-

urement, the volume is

automatically calculated

and displayed. The last indi-

vidual measured value is in-

dicated at the bottom in the

display, while the final re-

sult is shown at the top.

Continuous Measurement (Tracking)

(see figure D)

The continuous measurement function (track-

ing) is used for the transferring of measure-

ments, e.g., from construction plans. In contin-

uous measurement mode, the measuring tool

can be moved relative to the target, whereby the

measured value is updated approx. every

0.5 seconds. As an example, the user can move

from a wall to the required distance, while the

actual distance can be read continuously.

For continuous measurements, first select the

length measuring function and then press but-

ton 9 until the indicator for continuous

measurement appears on the display. The

laser is switched on and the measurement starts

immediately.

Move the measuring tool

until the required distance

value is indicated in the

bottom of the display.

Briefly pressing button 9

ends the continuous meas-

urement. The last meas-

ured value is indicated at the bottom in the dis-

play. Pressing button 9 for several seconds

restarts a continuous measuring run.

The continuous measuring automatically switch-

es off after 5 min. The last measured value re-

mains indicated in the display.

Deleting Measured Values

Briefly pressing button 13 deletes the last indi-

vidual measuring value determined in all meas-

uring functions. Briefly pressing the button

repeatedly deletes the individual measured

values in reverse order.

Memory Functions

When switching off the measuring tool, the

value in the memory is retained.

Storing/Adding Measured Values

Push the memory add but-

ton 3 in order to store the

current measured value – a

length, area or volume val-

ue, depending on the cur-

rent measuring function.

As soon as a value has been stored, “M” is indi-

cated in the display and the “+” behind it briefly

flashes.

If a value is already stored in the memory, the new

value is added to the memory contents, however,

only when the measures of unit correspond.

As an example, when an area value is in the

memory and the current measured value is a

volume value, the addition cannot take place.

“Error” briefly flashes in the display.

OBJ_BUCH-724-001.book Page 19 Tuesday, July 29, 2008 1:25 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DLE 40 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch DLE 40 Manual

Product: