Manual Bosch DLE 40 (page 20 of 268) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

97279

Zoom out

Zoom in

1/268

20 | English

2 609 140 582 | (29.7.08) Bosch Power Tools

Subtracting Measured Values

Push the memory subtraction button 11 in order

to subtract the current measured value from the

memory value. As soon as a value has been sub-

tracted, “M” is indicated in the display and the

“

–” behind it briefly flashes.

If a value is already stored in the memory, the

new measured value can be subtracted only

when the measures of unit correspond (see

“Storing/Adding Measured Values”).

Displaying the Stored Value

Push the memory retrieve

button 2 in order to display

the value stored in the

memory. “M=” is indicated

in the display. When the

memory contents “M=” is

indicated in the display, it can be doubled by

pushing the memory add button 3 or set to zero

by pushing the memory subtract button 11.

Deleting the Memory

To delete the memory contents, first push the

memory retrieve button 2, so that “M=” is indi-

cated in the display. Then briefly press button

13; “M” is no longer indicated in the display.

Working Advice

General Information

The reception lens 19 and the laser beam outlet

18 must not be covered when taking a measure-

ment.

The measuring tool must not be moved while

taking a measurement (with the exception of

the continuous measurement function). There-

fore, place the measuring tool, as far as this is

possible, against or on the measuring points.

Measurement takes place at the centre of the

laser beam, even when target surfaces are sight-

ed at an incline.

Influence Effects on the Measuring Range

The measuring range depends upon the light

conditions and the reflection properties of the

target surface. For improved visibility of the

laser beam when working outdoors and when

the sunlight is intense, use the laser viewing

glasses 21 (accessory) and the laser target plate

22 (accessory), or shade off the target surface.

Influence Effects on the Measuring Result

Due to physical effects, faulty measurements

cannot be excluded when measuring on differ-

ent surfaces. Included here are:

– Transparent surfaces (e.g., glass, water),

– Reflecting surfaces (e.g., polished metal,

glass),

– Porous surfaces (e.g. insulation materials),

– Structured surfaces (e.g., roughcast, natural

stone).

If required, use the laser target plate 22 (acces-

sory) on these surfaces.

Also, air layers with varying temperatures or

indirectly received reflections can affect the

measured value.

Sighting with the Alingment Aid (see figure E)

With the alignment aid 7, sighting over larger dis-

tances is a lot easier. For this, look alongside the

aligning aid on the top side of the measuring tool.

The laser beam runs parallel to this line of sight.

Working with the Tripod (see figure C)

The use of a tripod is particularly necessary for

larger distances. Position the measuring tool

with the 1/4" thread 14 onto the quick-change

plate of the tripod 20 or a commercially available

camera tripod. Tighten the measuring tool with

the locking screw of the quick-change plate.

When positioning the tripod, observe that the

measurement will take place beginning from the

rear or front edge of the measuring tool, de-

pending on the selected reference level.

OBJ_BUCH-724-001.book Page 20 Tuesday, July 29, 2008 1:25 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DLE 40 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch DLE 40 Manual

Product: