697410
21
Zoom out
Zoom in
Previous page
1/40
Next page
6 720 646 804
Operating Instructions
21
Fig. 16
4.4 Operating modes
This water heater defaults to the Auto operating mode.
The Auto mode is the recommended setting for this
water heater, but can be changed if desired.
Economic Mode
Economic is the the most energy-efficient mode for this
water heater. It takes heat from the surrounding air to
heat the water. The time it takes to heat the water is
longer in this mode, so it may NOT be sufficient if you
have a high-demand situation such as a large
household.
Electric Mode
This mode uses only the upper and lower heating resist-
ance elements to heat the water. The time it takes to
heat the water is less in this mode, but it is the LEAST
energy-efficient mode.
Auto Mode (recomended mode)
Auto mode combines the energy efficiency of Economic
with the recovery speed and power of the Electric
mode, with normal water usage.
4.5 Feature buttons on the user inter-
face
Vacation mode
This feature is used when you will be away from the
home for an extended period of time and hot water is
not needed. In this mode, the unit will drop the water
temperature down to 50°F and will use the most
efficient heating mode to conserve energy while the
heater is sitting idle. The unit will automatically resume
heating one day before your return, so that hot water will
be available.
For example if you will be gone 14 days, press the
VACATION OR AWAY button, press the UP arrow
button until the display reads 14 days (the default is 14
days) and press ENTER. The unit will drop the water
temperature down to 50°F for 13 days. At the end of the
13th day, it will automatically return to the previous
operating mode and heat the water to the original
temperature setting.
Control lock
The control pad can be locked out to prevent accidental
key presses.
Simply press and hold the ENTER button for three
seconds. The display will show the lock icon when this
feature has been activated. No other key presses will be
allowed when the controls are locked.
To deactivate the lock, press and hold the ENTER pad
for three seconds. The screen will go to the default
display.
4.6 Using the combination buttons
By pressing select buttons on the control panel in
combination, a variety of options and parameters can be
changed.
4.6.1 °F and °C conversion
The water temperature display will default to °F.
To show the temperatures in °C:
B Press the ENTER and MODE buttons simultaneously
for 1 second.
NOTE: To change back to °F, repeat the step above.
4.6.2 Inquire component’s parameter
To inquire component’s parameters:
B Press the ENTER and UP buttons simultaneously for
1 second.
NOTE: To exit the inquire function, repeat the step
above.
4.6.3 Clear malfunction
To clear a malfunction:
B Press the ENTER and DOWN buttons simultane-
ously for 1 second.
4.6.4 Clear an alarm
To clear an alarm:
B Press the ENTER and DOWN buttons simultane-
ously for 1 second.
Danger: If the water temperature is set
too high, you may suffer a scalding inju-
ry from hot water; after you have set the
temperature setting, check the temper-
ature of the water to ensure it is not too
hot. 120°F is the recommended water
temperature setting.
MODE
vacation
press 3 seconds
for unlock
6720646804-07.1V
ENTER
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Compress 3000 - HP 200-1 E AI-F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Compress 3000 - HP 200-1 E AI-F in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info