707803
13
Zoom out
Zoom in
Previous page
1/195
Next page
English | 13
Bosch Power Tools F 016 L81 619 | (22.9.16)
Noise/Vibration Information
Declaration of Conformity
Equipment category: 33
Notified body:
TÜV Rheinland Intercert Kft., Budapest, Hungary, Nr. 1008
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Mounting and Operation
Do not disassemble guard once connected.
Do not connect the machine to the mains socket before
it is completely assembled.
The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching “on” again.
Do not rapidly switch off and on.
Remove any grass from spool cover when changing line
or spool.
Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
Check the guard screw is fixed tightly before using.
Spool feeds line each time the machine comes to a stop
(trigger is released), and line is cut when machine is
started again.
Sound emission values determined according to
EN 50636-2-91.
3 600 HA5 8..
3 600 HA5 9..
3 600 HA5 2..
3 600 HA5 3..
3 600 HA5 4..
3 600 HA5 5..
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
dB(A)
dB(A)
dB
73
93
=1.0
73
93
=1.0
74
94
=2.0
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 50636-2-91:
Vibration emission value a
h
Uncertainty K
m/s
2
m/s
2
= 4.5
=1.5
= 5.0
=1.5
= 6.5
=2.0
3 600 HA5 8..
3 600 HA5 9..
3 600 HA5 2..
3 600 HA5 3..
3 600 HA5 4..
3 600 HA5 5..
We declare under our sole responsibility that the product de-
scribed under “Technical data” is in conformity with all relevant
provisions of the directives 2011/65/EU, until 19 April 2016:
2004/108/EC, from 20 April 2016 on: 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60335-1,
EN 50636-2-91, EN 50581.
2000/14/EC: Guaranteed sound power level:
Conformity assessment procedure according to Annex VI.
dB(A) 94 94 96
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ECS
Action Figure Page
Delivery Scope
1 189
Adjusting the Handle
2 189
Mounting the Cutting Guard
3 190
Mounting wheels
4 191
Connecting the extension lead
5 191
Switching On and Off
6 192
Working Advice
Adjusting the Cutting Height
7 192
Changing to edging mode
8 192
Removing the line spool
9 193
Winding Line on Spool
10 193
Replacing the Line Spool
11 194
Fitting Spool into Spool Holder
12–13 194
Maintenance, Cleaning and Storage
14 195
Selecting Accessories
15 195
OBJ_BUCH-1983-006.book Page 13 Thursday, September 22, 2016 9:42 AM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch ART 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ART 30 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info