Manual Bosch ART 30 (page 11 of 195) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

707803

Zoom out

Zoom in

1/195

English | 11

Bosch Power Tools F 016 L81 619 | (22.9.16)

Take care against injury from the

blade fitted for cutting the nylon line

length. After feeding line always re-

turn the trimmer to its horizontal op-

erating position before switching on.

Switch off and remove the plug from

the socket:

– whenever you leave the machine

unattended for any period

– before replacing the spool

– before cleaning or working on the

trimmer

After use, disconnect the machine

from the mains and check for dam-

age.

Store the machine in a secure, dry

place out of the reach of children. Do

not place other objects on top of the

machine.

Replace worn or damaged parts for

safety.

Ensure replacement parts fitted are

Bosch approved.

Do not operate the machine with-

out the trimmer attachment fitted.

Electrical Safety

Warning! Switch off, remove plug

from mains before adjusting,

cleaning or if cable is cut, damaged

or entangled.

The cutting line continues to rotate

for a few seconds after the trimmer

is switched off.

Caution – do not touch rotating

cutting line.

Your machine is double insulated for

safety and requires no earth connec-

tion. The operating voltage is 230 V AC,

50 Hz (for non-EU countries 220 V,

240 V as applicable). Only use ap-

proved extension cables. Contact your

Bosch Service Centre for details.

It is recommended for increased

electrical safety to use a Residual

Current Device (RCD) with a tripping

current of not more than 30 mA. Al-

ways check your RCD every time you

use it.

For products not sold in GB:

WARNING: For your safety, it is re-

quired that the plug attached to the ma-

chine is connected with the extension

cord. The coupling of the extension

cord must be protected against splash

water, be made of rubber or coated

with rubber. The extension cord must

be used with a cable strain relief.

The connection lead must be inspected

for signs of damage at regular intervals

and may only be used if in perfect con-

dition.

If the supply cord is damaged, it must

be replaced by a Bosch Service Centre.

Extension cords should only be used if

they comply with H05VV-F or H05RN-F

types.

Products sold in GB only: Your prod-

uct is fitted with a BS 1363/A ap-

proved electric plug with internal fuse

(ASTA approved to BS 1362).

If the plug is not suitable for your

socket outlets, it should be cut off

and an appropriate plug fitted in its

place by an authorised customer ser-

vice agent. The replacement plug

should have the same fuse rating as

the original plug.

OBJ_BUCH-1983-006.book Page 11 Thursday, September 22, 2016 9:42 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ART 30 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch ART 30 Manual

Product: