537971
18
Zoom out
Zoom in
Previous page
1/98
Next page
EURO • Printed in England • BA F016 L69 913 • ART 23/25 • GB • OSW 02.07
English - 6
Line spool
ART 23 G F 016 800 001
ART 23 GF/GFS/GFSV F 016 800 002
ART 25 GSA/GSAV/ERGOPOWER F 016 800 050
Line refill (24 m)
ART 23 G/GF/GFS/GFSV
(1.4 mm) F 016 800 003
ART 25 GSA/GSAV/ERGOPOWER
(1.6 mm) F 016 800 052
Stop and remove plug from the power sup-
ply.
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris, especially
from the ventilation slots 7.
Turn the machine on its side and clean the cutting
guard 8 inside. If grass cuttings are compacted, re-
move with a wooden or plastic implement.
The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
The machine has been assembled in
an environmentally responsible way.
Recycle raw materials instead of
disposing as waste.
Machine, accessories and packaging
should be sorted for environment-
friendly recycling.
These instructions are printed on re-
cycled paper manufactured without
chlorine.
The plastic components are labelled
for categorized recycling.
When the time comes to dispose of this product,
please consider the environment and take it to a rec-
ognized recycling facility (please contact your local
authority for location information).
Accessories After Trimming/Storage
Fault Finding
Symptom Possible Cause Remedy
Machine fails to operate Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Machine functions
intermittently
Extension cable damaged
Machines internal wiring damaged
Inspect cable, replace if damaged
Contact Service Agent
Machine labours Grass too high Cut in stages
Machine is not cutting Line too short/broken off Feed the line manually/automatically
Line can’t be fed
automatically
Spool empty
Line inside the spool entangled
Replace the spool
Inspect the spool, rewind if necessary
Environmental Protection
F016 L69 913.book Seite 6 Dienstag, 23. Juli 2002 11:37 11
18 • F016 L69 913 • TMS • 16.07.02
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch ART 25 GSAV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ART 25 GSAV in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info