Manual Bosch ART 25 GSAV (page 16 of 98) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

537971

Zoom out

Zoom in

1/98

EURO • Printed in England • BA F016 L69 913 • ART 23/25 • GB • OSW 02.07

English - 4

III = Handle back for one-handed trimming, une-

qualled trimming range, and support.

IV = Handle location for vertical trimming and edg-

ing jobs.

➋ Fold the clamping lever 10 back to fix the adjust-

able handle 3 in the adjusted position.

Adjusting Handle Height or Trimming/Edging

Position (see figure )

(Model ART 23 GFSV)

(Model ART 25 GSAV)

(Model ART 25 ERGOPOWER)

➊ Slide release button 9 towards trimmer head.

➋ Adjust the shaft 5 to one of six possible handle

height positions.

➌ If necessary turn the shaft 5 180° to position the

trimmer head for trimming/edging as shown.

(see figure )

Remove stones, loose pieces of wood and

other objects from the cutting area.

The cutting line continues to rotate for a few sec-

onds after the trimmer is switched off. Allow the

motor/cutting line to stop rotating before switch-

ing “on” again.

Do not rapidly switch off and on.

Switching On and Off

Press switch 1 and hold depressed. Release

switch 1 for switching off.

Cutting Grass

Move the trimmer left and right, keeping it well away

from the body. (see figure )

The trimmer can efficiently cut grass up to a height

of 15 cm. Cut taller grass in stages.

For increased access move adjustable handles 3 to

position III. (see figure )

(Model ART 23 GFS/GFSV)

(Model ART 25 GSA/GSAV)

Trimming Edges

(Model ART 23 GFSV/ART 25 GSAV/ART 25 ER

GOPOWER)

Run the trimmer along the edge of the lawn. Do not

allow the cutting line to contact paved surfaces or

garden walls, since this will wear the line rapidly.

Trimming Edges (see figure )

(ART 23 GFS/ART 25 GSA)

Use handle position IV for edging.

Cutting Around Trees and Bushes

Carefully cut around trees and bushes so that they

do not come into contact with the cutting line.

Plants can die if you damage the bark.

For better control use guide handle 4 or adjustable

handle 3.

The rotating line can wear or break. You will notice

when the motor runs without load and no grass is

cut.

Model (see figure ) ART 23 G

Switch off the machine and remove plug

from the mains.

The line must be fed manually:

Hold the spool plate 14 in position, lift the line up and

pull it out approx. 9 cm counter-clockwise. Clasp the

line between the studs of the spool plate. The

spool 16 does not need to be removed.

If the line is exceeding the maximum cutting circle it

will be cut by the blade 15 integrated in the cutting

guard 8.

Model (see figure ) ART 23 GF/GFS/GFSV

While operating the trimmer press and release the

trimmer firmly against a solid base such as a pave-

ment surface (necessary pressure approx. 3 kg).

The spool will release approx. 4 cm of line per ac-

tion.

When the line breaks off completely feed twice to re-

gain the full cutting circle.

If the line is exceeding the maximum cutting circle it

will be cut by the blade 15 integrated in the cutting

guard 8.

Model ART 25 GSA/GSAV/ERGOPOWER

While operating the trimmer the line will be fed auto-

matically when it breaks.

If the line breaks off completely, the automatic feed

may not be able to function correctly.

Cutting and Edging

Feeding the Line

F016 L69 913.book Seite 4 Dienstag, 23. Juli 2002 11:37 11

16 • F016 L69 913 • TMS • 16.07.02

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ART 25 GSAV in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch ART 25 GSAV Manual

Product: